Nope. /dev/urandom errors persist. At this point I have multiple copies of different versions of ClamAV scattered all over my mail server. I am running out of room for my mail server to do its primary job, which is as a mail server. I think I will take a step back, clean out my hard drive of all useless crap, uninstall all versions of clamAV, and try again.
[EMAIL PROTECTED] bin]# df -l Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda2 7455556 5729000 1347824 81% / (*Main hard drive) /dev/sda1 256667 54105 189310 23% /boot none 515444 0 515444 0% /dev/shm /dev/sdb1 17307036 72416 16355468 1% /scsi2 /dev/sdb2 17971020 2953052 14105076 18% /home Thanks again for all of your help. Once I get this installed, is their a place I can make a donation for supporting this software? Edward W. Ray MMICMAN, LLC 826 N. Red Robin Street Orange, CA 92869-1907 714-997-9226 (w) 714-997-3289 (f) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Fajar A. Nugraha Sent: Tuesday, March 16, 2004 9:05 PM To: [EMAIL PROTECTED] Subject: Re: [Clamav-users] Installed latest rpms of clamAV; "LibClamAV Error: !Can't open /dev/urandom" errors persist Edward W. Ray wrote: >Just not my day I guess. On "make" in devel build: > >cd .. && \ > /bin/sh /scsi2/tmp/clamav-devel-20040316/missing --run automake-1.6 >--gnu clamd/Makefile >aclocal.m4:4200: version mismatch. This is Automake 1.6.3, but >aclocal.m4 >aclocal.m4:4200: was generated for Automake 1.6.1. You should recreate >aclocal.m4:4200: aclocal.m4 with aclocal and run automake again. >make[1]: *** [Makefile.in] Error 1 >make[1]: Leaving directory `/scsi2/tmp/clamav-devel-20040316/clamd' >make: *** [install-recursive] Error 1 > > > :) This is a known "resident" problem on devel build. Sometimes it's there, sometimes it's not. The easiest work-around is to rename or remove (temporarily) /usr/bin/automake-1.6 to something else (e.g. /usr/bin/automake-1.6-old). Then remove your build dir completely, untar from fresh source, and re-run ./configure With that trick, today's snapshot builds fine on Fedora Core 1 (http://clamav.or.id/snapshot/clamav-devel-latest.linux.tar.gz). Some people said simply running aclocal, autoconf, and automake on your build dir works. I haven't tried that though. Regards, Fajar ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Clamav-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/clamav-users ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Clamav-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/clamav-users
