method_1:
a. upload config_snippet to flash: (via method of choice tftp,
sneaker-net via flash2, etc)
b. copy flash:/config_snippet.txt system:running.config
method_2:
b. copy tftp://<ip_addr>/config_snippet.txt system:running.config
I prefer method_1 as this mitigate dependencies on network
connectivity. However, both methods assume config syntax valid and QA'd
(as error msgs will manifest to std_output, so avoid garbage in, garbage
out scenario).
Regards,
Ge Moua
University of Minnesota Alumnus
[email protected]
--
On 06/20/2014 09:39 AM, Lukas Tribus wrote:
copy'n'pasting from notepad is not
enough in that situation (somehow, the terminal slows down when pasting
the config to some 2 - 3 chars per second)
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
