Thanks to everyone who replied - /128 it is.
> From: [email protected] > To: [email protected] > Date: Thu, 21 Nov 2013 19:38:51 +1100 > Subject: [c-nsp] IPv6 / OSPFv3 > > > Hi Everyone, > > What is "recommended" practice when configuring OSPFv3/IPv6 Loopbacks? Do > you assign /128's or /64's - If /64's do you need to enable "ipv6 ospf > network point-to-point" under the loopback so that the IPv6 address is > advertised as a /64 and not as /128? > > And Is it any more complicated than enabling "ipv6 ospf nn area n" under the > Interfaces you want OSPF to run on? (i.e. If I am just wanting to have my > loopback addresses and interpop link addresses in IGP) > > Cheers > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
