Hi Everyone,
What is "recommended" practice when configuring OSPFv3/IPv6 Loopbacks? Do you
assign /128's or /64's - If /64's do you need to enable "ipv6 ospf network
point-to-point" under the loopback so that the IPv6 address is advertised as a
/64 and not as /128?
And Is it any more complicated than enabling "ipv6 ospf nn area n" under the
Interfaces you want OSPF to run on? (i.e. If I am just wanting to have my
loopback addresses and interpop link addresses in IGP)
Cheers
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
