On 21/11/13 08:38, CiscoNSP List wrote:
Hi Everyone, What is "recommended" practice when configuring OSPFv3/IPv6 Loopbacks? Do you assign /128's or /64's - If /64's do you need to enable "ipv6 ospf network point-to-point" under the loopback so that the IPv6 address is advertised as a /64 and not as /128?
We do /128 and there is no complex config beyond the ospf area: interface Loopback1 ipv6 address 2001:db8:12::1/128 ipv6 ospf 1 area 0 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
