What radio is this for? Some radios only have 128 channels (0-127). To add more than that won’t work.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator. > On Jan 16, 2019, at 06:33, Glenn At Home <glenner...@cableone.net> wrote: > > I use Excel, I can see if there is a way to put those in. > But those lines have never been an issue. > I only encountered an error when I added the channels between 127 and 140. > Glenn > > ----- Original Message ----- > From: Neil B > To: Discussion of CHIRP > Sent: Wednesday, January 16, 2019 6:00 AM > Subject: Re: [chirp_users] more trouble with CSV file > > mem 16 onwards is missing commers on ends of each line. > 5 missing if line ends in a 5, 4 missing if it ends in a S. > > 14,FRS14,467.7125,,0,,88.5,88.5,23,NN,NFM,5,,,,, > 15,GMR15,462.55,,0,,88.5,88.5,23,NN,FM,5,S > > 14,FRS14,467.7125,,0,,88.5,88.5,23,NN,NFM,5,,,,, > 15,GMR15,462.55,,0,,88.5,88.5,23,NN,FM,5,S,,,, > ----- Original Message ----- > From: John Mehl > To: Discussion of CHIRP > Sent: Wednesday, January 16, 2019 11:40 AM > Subject: Re: [chirp_users] more trouble with CSV file > > Hi Glenn; if you can use notepad Try looking at your csv file with it. I see > a difference in the record format starting at line 15. I'm not sure but I > believe csv records are to be the same length. Also starting after 135 there > are blank entrys. > Looks like line # 136 to 137 are missing, also 139 and 140. I don't know if > this your problem or not. However I could not load your file using Chirp, it > caused an error .... Good luck...John M... > > > >> On Tue, Jan 15, 2019 at 11:38 PM Glenn At Home <glenner...@cableone.net> >> wrote: >> Hi All, >> Maybe someone can figure out what I did wrong in my CSV file. >> It was working, and I added a 10 meter repeater and two 6 meter repeaters >> and a 1.25 meter repeater. >> It says error on line 169, but it always seems to reference the last line. >> The lines in question would be between the left most numbers of 127 and 140. >> The repeaters on repeater.com only gave one tone, and I put in the others, >> the 6 & 10 m, just to keep the fields full. >> The one that was given was the 1.25 m repeater, I'll list that one below: >> 224.7600 >> >> -1.6 MHz >> >> 146.2 >> >> Omaha >> >> Thanks for any help. >> >> Sent From My Tabletop >> _______________________________________________ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to John at ke4...@arrl.net >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to m1cfk at n...@hotmail.co.uk > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Glenn at glenner...@cableone.net > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jardy at jard...@yahoo.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
