Yep. I missed the “bare metal” Sent from my iPhone
> On Dec 5, 2024, at 16:31, Mike Katz <bit...@12bitsbest.com> wrote: > > I'm sorry I thought bare metal (no operating system) was descriptive enough. > > To clarify I will be running this on an Doit ESP32 Devkit V1 Board with a > dual core Tensilica Xtensa L6 CPU running at 240 MHz with 4MB Flash and 520K > RAM. > > The code is Arduino based (it's not my original code). > >> On 12/5/2024 5:51 PM, Wayne S wrote: >> Oh. You didn’t specify the host type, although an esp MAY be fast enough. >> The Vax wasn’t that fast to begin with and ran in less than 4 MB memory so >> maybe… >> Sent from my iPhone >> >>>> On Dec 5, 2024, at 15:20, Mike Katz <bit...@12bitsbest.com> wrote: >>> >>> Thank you >>> >>> i don't think an ESP32 has the horsepower to run VMS🙂 >>> >>>> On 12/5/2024 5:16 PM, Wayne S wrote: >>>> Under VMS i think the smg$ routines did that. >>>> >>>> Sent from my iPhone >>>> >>>>>> On Dec 5, 2024, at 14:43, Mike Katz via cctalk <cctalk@classiccmp.org> >>>>>> wrote: >>>>> I am looking for a C library that implements a crude windowing system on >>>>> a VT-100 or compatible terminal via the serial port. I've seen such >>>>> things before but not recently. >>>>> >>>>> I will be running this on bare metal (no operating system). Preferably >>>>> the package would use the regional scrolling capabilities of the VT-100 >>>>> for faster screen updates. >>>>> >>>>> I might be able to get Txwindows to work but I am looking for something a >>>>> bit simpler? >>>>> >>>>> Any ideas would be greatly appreciated. >>>>> >>>>> Thank you.... >>>>> >>>>> Mike >
