On Tue, Feb 22, 2022 at 3:29 PM Rod Smallwood via cctalk < cctalk@classiccmp.org> wrote:
> > On 22/02/2022 23:16, Glen Slick via cctalk wrote: > > On Tue, Feb 22, 2022 at 2:20 PM Rod Smallwood via cctalk > > <cctalk@classiccmp.org> wrote: > >> I'm sure that will work. Unfortunatly dd is a linux command. > >> > >> I only have windows PC's. > >> > > You never answered if you have a SCSI controller in your PC, or have > > the ability to add a SCSI controller to your PC. If you don't, the > > whole discussion of using 'dd' or equivalent is moo. > > > > > >> simH is highly complex and needs a lot of setup. ( I know - I tried - > >> total nightmare) > >> > > If you think setting up and using SIMH is highly complex, wait until > > you find out how complex setting up and using real PDP-11 hardware is. > > > > > >> It does not have support for the CMD CDD 220 SCSI controller and a > RH-18A > >> > > Huh? SIMH emulates MSCP controllers and attached disks of arbitrary > > size just fine. > > PDP hardware setup ? Well I worked for digital between 1975 and 1985. > Then you should be able to make SIMH work, no problem. - Josh > > R > > >
