Great to know Tony! Yea the battery is dead indeed! Will the wallwart power it even though the battery is dead? Wish I could remember where I put the wall warts... missing are the one for a 16 line portable, a disc drive and the thinkjet printer.
Oddly enough the HP 75 we have is missing its wall wart too! HP 75 also uses the HIL i/o interface. will it know how to red the disc drive? I am missing HP 75 data and catalogs.... Ed# In a message dated 7/21/2019 8:44:22 PM US Mountain Standard Time, ard.p850...@gmail.com writes: On Sun, Jul 21, 2019 at 7:02 PM ED SHARPE via cctalk <cctalk@classiccmp.org> wrote: > > thanks for pointing this handy manual out just got one of these in alas > with out the wall wart to charge it... and the 16 line screen version > has is in a display but its wall ward is stored .... somewhere....anyone > have a box of these and wants to share let me know. thanks Ed# > In a message dated 7/19/2019 3:13:29 PM US Mountain Standard Time, > cctalk@classiccmp.org writes: > > http://bitsavers.org/pdf/hp/portablePlus/45559-90001_Portable_PLUS_Technical_Reference_Manual_Aug1985.pdf The 16 line display version is the original HP Portable (HP110), not the PortablePlus. They both use the same AC adapter/charger which gives 8V AC. It's the same unit used with the Topcat calculators (HP91, HP92, HP95C, HP97, HP97S) and most of the HPIL peripherals. There were various versions with different input voltages and mains plug connectors but it shouldn't be hard to find one. The Portable and PortablePlus have an internal lead-acid battery. Originally 3 Cyclon cells (2.5Ah) in series, later a Panasonic (IIRC) block. The Cyclon cells are not difficult to get new, so I normally wire 3 of those up, using the terminal plate from the original battery pack. -tony