Hi, On Thu, Jan 18, 2018 at 08:26:45PM -0600, Jason T via cctalk wrote: > On Thu, Jan 18, 2018 at 7:55 PM, Richard Cini <rich.c...@verizon.net> wrote: > > I use this card as a floppy/disk controller in a PC/AT that's used solely > > for imaging. The controller is connected to two Seagate ST-2502N (442MB) > > hard drives running MS-DOS 6.22. Works like a champ. Cables are readily > > available on eBay but since they're regular 50-pin IDC connectors, you can > > DIY if needed -- connectors are readily available. > > Do you have (and can you post) the MS-DOS drivers for that card? I > also run one in my floppy imager machine, which dual-boots btw. MS-DOS > and some later Linux. Having SCSI for at least one of the OSes would > be nice. > > I could also switch the other partition over to FreeBSD, as Warner L > suggested.
I think you want this: http://files.markgthomas.com/dl/adaptec/EZSCSI40.IMD (This URL is temporary.) I just found, imaged, and installed it, on my disk-imaging PC using an AHA-1522A: ------------------------------------------------------- IMD 1.18: 24/12/2017 4:54:15 Adaptec EZ-SCSI v4.01a Setup Diskette Disk 1of1 HD 3.5 Windows 95/NT/3.1x and DOS Drivers >From Windows 95 or NT Click Start, Run, Type a:\setup >From Windows 3.1 or NT 3.52 File/Run Type a:\setup >From DOS Type a:, Type dosinst ------------------------------------------------------- Mark -- Mark G. Thomas (m...@misty.com), KC3DRE
