I use this card as a floppy/disk controller in a PC/AT that's used solely for imaging. The controller is connected to two Seagate ST-2502N (442MB) hard drives running MS-DOS 6.22. Works like a champ. Cables are readily available on eBay but since they're regular 50-pin IDC connectors, you can DIY if needed -- connectors are readily available.
Rich -- Rich Cini http://www.classiccmp.org/cini http://www.classiccmp.org/altair32 On 1/18/18, 8:44 PM, "cctalk on behalf of Jason T via cctalk" <cctalk-boun...@classiccmp.org on behalf of cctalk@classiccmp.org> wrote: On Thu, Jan 18, 2018 at 6:58 PM, Adrian Graham via cctalk <cctalk@classiccmp.org> wrote: > I could, but I guess by the time I’ve sourced a replacement I might as well have bought an AHA-1522A instead, I have a couple of scouts out looking for them as we speak :) The 1522A is a full pass for TESTFDC. Has anyone using one of these cards made use of the SCSI function? It has a Centronics 50 connector, which isn't terribly useful unless you've got the right cable, but if you're building an all-in-one imaging machine, it might be handy to have SCSI capability as well. It seems the driver hasn't been in Linux for quite a few versions. Not sure about the BSDs.
