Output:
.SET DU CSR=17760340
?DU-W-Patch handler bootstrap, put CSR at 3264
As you may have already learned, use only 16bit addresses for this.
Hi Jerry,
Thanks, you found the failure! (it's always the same with Copy and Paste).
After I have corrected this to 160340 and afterwards all was running
fine, and I was able to INIT the Disk.
A format was still not possible, but I think this is normal and works as
designed?!
Last step was to set the adapter CSR to the MSCP default, to bypass
further issues due to the non default CSR.
As there is at the moment no plan for additional MSCP adapter in this
PDP, it will be fine.
After this change I was needed to restore the original DU.SYS, as
booting was not possible, and a SYSGEN is by now not an option. (will
look at it later on, to understand a bit more about)
>>
?BOOT-U-â–’Conflicting SYSGEN options
>>
Now I have managed to boot from the SCSI disk, which is a great result.
>>>
Trying DU0
Starting system from DU0
RT-11SJ (S) V04.00I
.SET TT QUIET
?KMON-F-File not found SY:RTPRES.SAV
?KMON-F-File not found SY:DATE.SAV
?KMON-F-Illegal device VW:
?KMON-F-Illegal device BS:
?KMON-F-Illegal device HC:
.DIR
US .SYS 7 26-Nov-91 TT .SYS 2 26-Nov-91
DL .SYS 4 26-Nov-91 DU .SYS 4 26-Nov-91
RK .SYS 3 26-Nov-91 DY .SYS 4 26-Nov-91
DX .SYS 3 26-Nov-91 LP .SYS 2 26-Nov-91
SC .SYS 5 26-Nov-91 HC .SYS 5 26-Nov-91
BS .SYS 3 26-Nov-91 VW .SYS 2 26-Nov-91
NL .SYS 2 26-Nov-91 LS .SYS 2 26-Nov-91
SCMEV .SYS 5 26-Nov-91 SCVS11.SYS 4 26-Nov-91
SCEVA .SYS 4 26-Nov-91 LPMEV .SYS 2 26-Nov-91
LPLXY .SYS 2 26-Nov-91 LPSID .SYS 2 26-Nov-91
LPEVA .SYS 2 26-Nov-91 MS .SYS 10 26-Nov-91
MM .SYS 9 26-Nov-91 HC7221.SYS 4 26-Nov-91
HC7220.SYS 5 26-Nov-91 HC722T.SYS 5 26-Nov-91
US460 .SYS 7 26-Nov-91 US410 .SYS 7 26-Nov-91
HC7580.SYS 5 26-Nov-91 HC7550.SYS 5 26-Nov-91
HC7475.SYS 5 26-Nov-91 HC722C.SYS 5 26-Nov-91
SCMPR .SYS 5 26-Nov-91 DUORG .SYS 4 26-Nov-91
STARTS.COM 1 26-Nov-91 PIP .SAV 23 26-Nov-91
DIR .SAV 17 26-Nov-91 DUP .SAV 41 26-Nov-91
RESORC.SAV 15 26-Nov-91 FORMAT.SAV 19 26-Nov-91
SWAP .SYS 25 26-Nov-91 RT11SJ.SYS 65 26-Nov-91
CHKPNT.SYS 412 09-Aug-94
43 Files, 763 Blocks
58469 Free blocks
>>
So next step is to look at a newer RT11 version, and try to install all
from scratch.
Again many thanks!
Have a nice Weekend
Ulrich
