On 8/20/2016 10:35 PM, Jerry Weiss wrote:
On Aug 20, 2016, at 10:27 AM, Douglas Taylor <dj.tayl...@comcast.net> wrote:
When I started this I hadn't put the RQDX2 back in, so I had only one UDA
controller and that's how I saw the DHV11 show up. When I put the RQDX2 back
in that's when I lost the DHV11.
I did the configure from VMS 5.5, it was a lot less verbose than what you
showed.
At this point I am wondering why I am fussing over such useless interchange medium as the
RX50 diskettes and the TK50 tape cassettes. Of course to the hobbyist the answer is
"Because they are there!" and you better get them working. I would be better
off with a DELQA, BTW will the cabinet kit from a DEQNA work with the DELQA?
Yes, I’ve used a cabinet kit from a DEQNA on a DELQA using 11/73’s.
In the Microsystem Options http://vaxhaven.com/images/1/16/EK-192AA-MG-001.pdf
<http://vaxhaven.com/images/1/16/EK-192AA-MG-001.pdf> it appears the cable set
is the same for both.
Jerry
I found a cabinet kit that appears to be for the BA123 and on the plate
with the AUI connector it is labeled 'DEQNA'. I became suspicious that
DEC would sell the same hardware, but with the label 'DELQA', and charge
you more, of course. I think that I got this one because when a DEQNA
was upgraded to a DELQA that cabinet kit was 'upgraded' also. Ha.
Doug