My 11/05 S's have the names of the cards printed on the chassis wall. The cards and their slots are listed in the 11/05 S docs. I have always referred to these unambiguous sources. As long as you have the matching mounting box for the version of model S of course.
Bill Degnan twitter: billdeg vintagecomputer.net On Oct 5, 2015 9:17 PM, "j...@cimmeri.com" <j...@cimmeri.com> wrote: > > > On 10/5/2015 10:24 AM, Henk Gooijen wrote: > >> >> ========= >> Sorry for the delayed answer, I don't have email available at work -:/ >> >> I have one M930 in slot 3 position A-B, because that is the termination >> for the processor. I am pretty sure (not 100%) that I also have an M930 >> in slot 9 position A-B. To be complete, this is the current state. >> slot 1 A-F : M7260 >> slot 2 A-F : M7261 >> slot 3 A-B : M930 C-D : G7273 >> slot 4 A-B : M9970 C-D : G7273 >> slot 5 C-D : G7273 >> slot 6 empty >> slot 7 empty >> slot 8 empty >> slot 9 A-B : M930 >> >> Slot 6-7-8-9 is for core memory, respectively G235, H217D, G114, M8293. >> The documentation says that a G727 should go in slot 3-4-5 position D. >> I hate those "knuckle-busters". Plus, I am lazy to check NPR continuity >> on the backplane, so I installed G7273s instead of G727s. Always good. >> >> I totally forgot that the GT40 is based on the 11/05. Great tip in case >> it turns out that I have a "different" CPU module! You never know ... >> > > > Henk, I'm confused by your slot arrangement, but maybe my 11/05 is > different than yours. > > My module utilization is as follows, and is an 8k backplane (the 16k > backplane is also different): > > slot 9 A-F : M7260 > slot 8 A-F : M7261 > slot 7 A-F : G110 > Slot 6 A-F :G231 > Slot 5 AB : M930 C-F : H214 > Slot 4 AB : blank C-F G727 in D4. > Slot 3 AB : M930 C-F G727 in D3 > Slot 2 AB: KM11 Maint C-F G727 in D2 > Slot 1 AB: DF11 Comm C-F G727 in D1 > > --------John > > >
