On 10/5/2015 10:24 AM, Henk Gooijen wrote:
=========
Sorry for the delayed answer, I don't
have email available at work -:/
I have one M930 in slot 3 position
A-B, because that is the termination
for the processor. I am pretty sure
(not 100%) that I also have an M930
in slot 9 position A-B. To be
complete, this is the current state.
slot 1 A-F : M7260
slot 2 A-F : M7261
slot 3 A-B : M930 C-D : G7273
slot 4 A-B : M9970 C-D : G7273
slot 5 C-D : G7273
slot 6 empty
slot 7 empty
slot 8 empty
slot 9 A-B : M930
Slot 6-7-8-9 is for core memory,
respectively G235, H217D, G114, M8293.
The documentation says that a G727
should go in slot 3-4-5 position D.
I hate those "knuckle-busters". Plus,
I am lazy to check NPR continuity
on the backplane, so I installed
G7273s instead of G727s. Always good.
I totally forgot that the GT40 is
based on the 11/05. Great tip in case
it turns out that I have a "different"
CPU module! You never know ...
Henk, I'm confused by your slot
arrangement, but maybe my 11/05 is
different than yours.
My module utilization is as follows, and
is an 8k backplane (the 16k backplane is
also different):
slot 9 A-F : M7260
slot 8 A-F : M7261
slot 7 A-F : G110
Slot 6 A-F :G231
Slot 5 AB : M930 C-F : H214
Slot 4 AB : blank C-F G727 in D4.
Slot 3 AB : M930 C-F G727 in D3
Slot 2 AB: KM11 Maint C-F G727 in D2
Slot 1 AB: DF11 Comm C-F G727 in D1
--------John
