HI HOUSSAM CHAHINE, Point-point links wont be having any conecpt of dr and bdr's,so they send hellos on IP 224.0.0.5. where as point-multipoint will be sending hellos on 224.0.0.6 so that's the reason neighborship is not coming up.
You are able to ping as they Ip's you configured could be in same subnet range... On Sun, Apr 21, 2013 at 9:16 PM, Houssam Chahine <[email protected]>wrote: > Good day, > > I configured ospf over the frame relay with Point to Multipoint on the Hub > and point-to-point on the spokes. Somehow the neighbors didn't come up > though i can ping the interfaces ip addresses. > > I tried to ping ospf multicast address with no replies. Once i configured > ospf over the FR using broadcast all the neighbors come up. > > Is there anything i missed for the Point to multipoint? > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
