Look at all of the parameters that need to match for OSPF neighbors to become adjacent and I think you'd find your answer.
Typically you'd configure P2MP on all neighbors even of the FR was set up as MP hub with P2P spokes. You can do what you were trying. You just need to see what didn't match. Bob -- Sent from my iPhone, please excuse any typos. On Apr 21, 2013, at 12:17 PM, Houssam Chahine <[email protected]> wrote: > Good day, > > I configured ospf over the frame relay with Point to Multipoint on the Hub > and point-to-point on the spokes. Somehow the neighbors didn't come up > though i can ping the interfaces ip addresses. > > I tried to ping ospf multicast address with no replies. Once i configured > ospf over the FR using broadcast all the neighbors come up. > > Is there anything i missed for the Point to multipoint? > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
