Point to point and point to multipoint use different timers. P2P are fast timers and P2M are slow. You should just set your spokes to P2M, otherwise you will need to adjust your timers to match. Show IP OSPF interface will show you the timers.
Point to Point timers are 10/40 Point to Multipoint timers are 30/120 V/r, Ryan Krcelic From: Houssam Chahine <[email protected]> Date: Sun, 21 Apr 2013 18:46:56 +0300 To: "[email protected]" <[email protected]> Subject: [OSL | CCIE_RS] OSPF Point-To-Multipoint Good day, I configured ospf over the frame relay with Point to Multipoint on the Hub and point-to-point on the spokes. Somehow the neighbors didn't come up though i can ping the interfaces ip addresses. I tried to ping ospf multicast address with no replies. Once i configured ospf over the FR using broadcast all the neighbors come up. Is there anything i missed for the Point to multipoint? _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
