Hi Mike, Am on the equipments trying what we said. I have formated and loaded the IOS with another router (2801) but still not working, infact the situation is even worse - the sys pwr led is continuosely blinking and the router is not even going to rommon, nothing i happenning on the console at all its just silent. But I can see very unreadable info when i press enter/space bar as shown;
ýìý½ýìýìýýýìýíýíý½ýìý½ýìýìýìýýý½ýíý½ý½ýìý½ývþìý½ýìýìý½ývþìý½ývþìývþìýìýíýìýìý½ý½ýìý½ýìýìý½ý½ýìýìývþìýìýýý½ýìý½ý½ýì ýìý½ýìýìý½ýìýìý½ývþvþìý½ýìýìýýý½ýìýýý½ývþìýíýìýìýýý½ýìýìý½ýìýìý½ývþìýìývþìýìýìýìýìý½ýìýìýìýýý½ýíý½ý½ýìýýý½ýìý½ývþvþìý íýìýìýìý½ýìýìývþìýìý½ý Have tried swapping the working flash with its IOS but to no avail. Not sure what is happening here. Men!! this thing were functioning very well. Regrds Cyrus On Tue, Apr 19, 2011 at 5:04 PM, [email protected] <[email protected]>wrote: > > > Thanks Mike, Let me try and let you know. > > > -----Original Message----- > From: Michael Smith > Sent: 19/04/2011, 4:44 pm > To: [email protected]; [email protected] > Subject: RE: [OSL | CCIE_RS] IOS on Rommon > > > > Hello Cyrus, > > It sounds like you have a classic case of a flash that is not formatted > properly. I ran into this issue the other week when I tried to update my > 3745 router's image. What I did end up doing was using one of my 2811's to > format the flash properly (it was already booted up in full IOS and I just > switched the current flash for the other routers flash). Once I formatted it > I downloaded a whole new IOS image (its possible that your IOS maybe > corrupted) onto the flash and then I placed the flash back into the router > and it loaded right up! Let me know if this works for you. > > > > > Date: Tue, 19 Apr 2011 15:35:49 +0300 > > From: [email protected] > > To: [email protected] > > Subject: [OSL | CCIE_RS] IOS on Rommon > > > > Hi Experts, > > > > Sorry, this out on the working environment but experts can do on whatever > > grounds am sure! > > > > I formatted my 2801 flash and loaded > c2801-adventerprisek9-mz.124-24.T5.bin > > from a flash disk. When i rebooted it loads, and restarts immediately > again > > and again and again displaying an error on the console > > File flash:crashinfo_20110419-120004 Device error :No such device > > File lic0:crashinfo_20110419-120004 Device error :No such device > > File lic1:crashinfo_20110419-120004 Device error :No such device > > > > I booed the router in ROMMON and loaded the IOS from it. I used the below > > configs. > > rommon 2 > set > > PS1=rommon ! > > > BSI=0 > > RANDOM_NUM=435087429 > > BOOT= > > WARM_REBOOT= > > IP_ADDRESS=192.168.2.1 > > IP_SUBNET_MASK=255.255.255.0 > > DEFAULT_GATEWAY=192.168.2.1 > > TFTP_SERVER=192.168.2.10 > > FE_PORT=F0 > > TFTP_FILE=c2801-adventerprisek9-mz.124-24.T5.bin > > RET_2_RTS=11:43:25 UTC Tue Apr 19 2011 > > RET_2_RCALTS=1303213416 > > CRASHINFO=crashinfo_FAILED > > ?=0 > > > > (There is the "CRASHINFO=crashinfo_FAILED" still, dont know what this > is!) > > > > > > > > I have tried loading the IOS (c2801-adventerprisek9-mz.124-24.T5.bin - > > 49,626KB) again using the below bub it copies upto 33551360KB and gives > an > > error "c2801-adventerprisek9-mz.124-24.T5.bin: No more retries > > left.Aborting." I thought of the flash space being used up as the flash > has > > 64MB and what I loaded early was 49MB and still trying to load the same > > capacity. But before hitting enter, there is a warning "WARNING: all > > existing data in all partitions on flash will be lost! Do you wish to > > continue? y/n: [n]: y " which am sure deletes everything in the flash > and > > loads a fresh IOS, Am I right or there is something am missing? > > > > Any insights on how i can may be delete the IOS from flash while on > Rommon > > mode so that i can create space for it again? or any way i can make the > > router operational will be really appreciated. Thanks to the forum for > > experts. > > > > rommon 3 > tftpdnld > > > > IP_ADDRESS: 192.168.2.1 > > IP_SUBNET_MASK: 255.255.255.0 > > DEFAULT_GATEWAY: 192.168.2.1 > > TFTP_SERVER: 192.168.2.10 > > TFTP_FILE: c2801-adventerprisek9-mz.124-24.T5.bin > > TFTP_MACADDR: 00:1a:2f:d1:a8:bc > > TFTP_VERBOSE: Progress > > TFTP_RETRY_COUNT: 18 > > TFTP_TIMEOUT: 7200 > > TFTP_CHECKSUM: Yes > > FE_PORT: 0 > > FE_SPEED_MODE: Auto Detect > > > > Invoke this command for disaster recovery only. > > WARNING: all existing data in all partitions on flash will be lost! Do > you > > wish to continue? y/n: [n]: y > > Receiving c2801-adventerprisek9-mz.151-3.T.bin from 192.168.2.10 !! > > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.................. [TIMED OUT] TFTP: > Operation > > terminated. > > > > rommon 4 > > > > > > > > > Regards > > > > Cyrus > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
