Hi Experts,
Sorry, this out on the working environment but experts can do on whatever
grounds am sure!
I formatted my 2801 flash and loaded c2801-adventerprisek9-mz.124-24.T5.bin
from a flash disk. When i rebooted it loads, and restarts immediately again
and again and again displaying an error on the console
File flash:crashinfo_20110419-120004 Device error :No such device
File lic0:crashinfo_20110419-120004 Device error :No such device
File lic1:crashinfo_20110419-120004 Device error :No such device
I booed the router in ROMMON and loaded the IOS from it. I used the below
configs.
rommon 2 > set
PS1=rommon ! >
BSI=0
RANDOM_NUM=435087429
BOOT=
WARM_REBOOT=
IP_ADDRESS=192.168.2.1
IP_SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=192.168.2.1
TFTP_SERVER=192.168.2.10
FE_PORT=F0
TFTP_FILE=c2801-adventerprisek9-mz.124-24.T5.bin
RET_2_RTS=11:43:25 UTC Tue Apr 19 2011
RET_2_RCALTS=1303213416
CRASHINFO=crashinfo_FAILED
?=0
(There is the "CRASHINFO=crashinfo_FAILED" still, dont know what this is!)
I have tried loading the IOS (c2801-adventerprisek9-mz.124-24.T5.bin -
49,626KB) again using the below bub it copies upto 33551360KB and gives an
error "c2801-adventerprisek9-mz.124-24.T5.bin: No more retries
left.Aborting." I thought of the flash space being used up as the flash has
64MB and what I loaded early was 49MB and still trying to load the same
capacity. But before hitting enter, there is a warning "WARNING: all
existing data in all partitions on flash will be lost! Do you wish to
continue? y/n: [n]: y " which am sure deletes everything in the flash and
loads a fresh IOS, Am I right or there is something am missing?
Any insights on how i can may be delete the IOS from flash while on Rommon
mode so that i can create space for it again? or any way i can make the
router operational will be really appreciated. Thanks to the forum for
experts.
rommon 3 > tftpdnld
IP_ADDRESS: 192.168.2.1
IP_SUBNET_MASK: 255.255.255.0
DEFAULT_GATEWAY: 192.168.2.1
TFTP_SERVER: 192.168.2.10
TFTP_FILE: c2801-adventerprisek9-mz.124-24.T5.bin
TFTP_MACADDR: 00:1a:2f:d1:a8:bc
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 18
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: Yes
FE_PORT: 0
FE_SPEED_MODE: Auto Detect
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash will be lost! Do you
wish to continue? y/n: [n]: y
Receiving c2801-adventerprisek9-mz.151-3.T.bin from 192.168.2.10 !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.................. [TIMED OUT] TFTP: Operation
terminated.
rommon 4 >
Regards
Cyrus
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
