Hey Jason, I agree with you here, as long as there aren't any restrictions you have satisfied the requirements of injecting a default route into the NSSA area (hence the no-summary key word)
Cheers! Steve -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of J D'Silva Sent: Monday, April 18, 2011 7:27 PM To: OSL Routing and Switching Subject: [OSL | CCIE_RS] Vol 1 Lab 11 Task 11.2 Hi All, I'm looking for opinions on the task mentioned in the subject. The task roughly translates to "Configure an NSSA area and inject a default route into only that area". The DSG uses the config: area 4 nssa default-information-originate But when I did this yesterday I instead used: area 4 nssa no-summary This task, or any other, doesn't place any other restrictions on what types of LSAs can enter the area so I'm thinking that both configs are equally valid given the criteria. Thoughts? Thanks, Jason _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
