you may get gns3 for ubuntu in launchpad: https://launchpad.net/ubuntu/+source/gns3
2009/10/17 Andrey 'sshd' Petrenko <[email protected]> > 1) wget ' > http://downloads.sourceforge.net/gns-3/GNS3-0.6.1-src.tar.gz?download'2) tar > xvf GNS3-0.6.1-src.tar.gz > 3) cd GNS3-0.6.1-src > 4) sudo python setup.py install > that's all. > > 2009/10/17 MANNY Omari <[email protected]> > > >> >> Hello, i have Installed Ubuntu 8.x 64bit and i found GNS3 installtion on >> Ubuntu 7.x “http://www.blindhog.net/gns3-installation-tutorial-for-linux/” >> but the thing is that it doesn't show the location of Python-qt4 I'm just >> stucked there, I have downloaded Python-qt4 but don't know where to paste >> the file, i cannot paste file in filesystem if i take the properties > >> permission it says “the permission of “/” determind. Any help please will be >> highly appreciated. >> >> >> Best Regards >> >> ------------------------------ >> From: [email protected] >> Date: Thu, 15 Oct 2009 21:16:28 -0700 >> Subject: Fwd: [OSL | CCIE_RS] GNS3 Installation on Ubuntu - 64bit >> To: [email protected]; [email protected] >> >> Guys, >> >> Try these steps. Should be simple. Mine worked after just editing >> sources.list and an update which included gns3 also. >> -Duleep >> >> ---------- Forwarded message ---------- >> From: *Justin Mitchell* <[email protected]> >> Date: Thu, Oct 15, 2009 at 11:01 AM >> Subject: Re: [OSL | CCIE_RS] GNS3 Installation on Ubuntu - 64bit >> To: Duleep Pillai <[email protected]> >> >> >> Follow the instructions here: http://gpl.code.de/oswiki/GplcodedeApt >> >> But use the following changes: >> >> Update your sources.list for Ubuntu >> Append the following lines to your /etc/apt/sources.list: >> >> # gpl.code.de >> deb http://gpl.code.de/ubuntu jaunty/ >> deb-src http://gpl.code.de/ubuntu jaunty/ >> >> >> Once you have made the changes, check for updates, you should get the >> latest and greatest version that way. >> >> Justin G. Mitchell >> http://www.google.com/profiles/jgmitchell >> >> >> >> On Thu, Oct 15, 2009 at 12:58 PM, Duleep Pillai <[email protected]> >> wrote: >> > Can you tell me how to do that? I tried update and it did not find any. >> > >> > Thanks, >> > >> > On Thu, Oct 15, 2009 at 10:29 AM, Justin Mitchell <[email protected] >> > >> > wrote: >> >> >> >> Make sure you install the updates from the GNS3 site. I had the same >> >> problems until I installed them. >> >> >> >> Justin G. Mitchell >> >> Sent from my G1 mobile phone >> >> >> >> On Oct 15, 2009 12:02 PM, "Duleep Pillai" <[email protected]> >> wrote: >> >> >> >> Hi All, >> >> >> >> Sorry for asking the same question again. Could not find a solution for >> >> this in the archives. >> >> >> >> I just installed a 64bit Ubuntu and am trying to run gns3. I cannot >> open >> >> the .net file pasted below (which is a customized IPExpert file). There >> is >> >> no error message. However, the same file is working on a 32 bit >> installation >> >> on a different machine. >> >> >> >> I can create a new project, but unable to save it either. Is there any >> >> permissions issue which I missed? I used the default installation >> process >> >> for Ubuntu and "sudo apt-get install gns3" for installing GNS3. >> >> >> >> >> >> Thanks, >> >> Duleep >> >> >> >> autostart = False >> >> [localhost:7202] >> >> workingdir = /home/duleep/DYNAMIPS/Working >> >> udp = 10200 >> >> [[3725]] >> >> ghostios = True >> >> image = >> >> >> /home/duleep/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T10.bin.unpacked >> >> ram = 256 >> >> sparsemem = True >> >> idlepc = 0x614ab070 >> >> [[ROUTER R6]] >> >> model = 3725 >> >> console = 2006 >> >> idlepc = 0x614ab0cc >> >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R6.cfg >> >> s0/1 = FR-Switch 6 >> >> f0/0 = Cat2 f1/6 >> >> f0/1 = Cat4 f1/6 >> >> slot2 = NM-4T >> >> s2/0 = R9 s2/0 >> >> s2/1 = R9 s2/1 >> >> x = 48.0 >> >> y = -37.0 >> >> [[ROUTER R7]] >> >> model = 3725 >> >> console = 2007 >> >> idlepc = 0x6026b438 >> >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R7.cfg >> >> s0/0 = R8 s0/0 >> >> f0/0 = Cat2 f1/7 >> >> f0/1 = Cat4 f1/7 >> >> x = -103.0 >> >> y = 365.0 >> >> [[ROUTER R8]] >> >> model = 3725 >> >> console = 2008 >> >> idlepc = 0x62b200d8 >> >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R8.cfg >> >> s0/0 = R7 s0/0 >> >> f0/0 = Cat2 f1/8 >> >> f0/1 = Cat4 f1/8 >> >> x = -304.0 >> >> y = 359.0 >> >> [[ROUTER R9]] >> >> model = 3725 >> >> console = 2009 >> >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R9.cfg >> >> f0/0 = Cat2 f1/9 >> >> f0/1 = Cat4 f1/9 >> >> slot2 = NM-4T >> >> s2/0 = R6 s2/0 >> >> s2/1 = R6 s2/1 >> >> x = 261.0 >> >> y = 331.0 >> >> [localhost:7203] >> >> workingdir = /home/duleep/DYNAMIPS/Working >> >> udp = 10300 >> >> [[3725]] >> >> ghostios = True >> >> image = >> >> >> /home/duleep/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T10.bin.unpacked >> >> ram = 256 >> >> sparsemem = True >> >> idlepc = 0x60c06d20 >> >> [[ROUTER Cat1]] >> >> model = 3725 >> >> console = 2010 >> >> idlepc = 0x60c059a8 >> >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat1.cfg >> >> slot1 = NM-16ESW >> >> f1/0 = Cat2 f1/0 >> >> f1/1 = R1 f0/0 >> >> f1/2 = R2 f1/0 >> >> f1/4 = R4 f0/0 >> >> f1/5 = R5 f0/0 >> >> f1/9 = BB1 e0/0 >> >> f1/10 = Cat4 f1/10 >> >> f1/11 = Cat4 f1/11 >> >> f1/12 = Cat3 f1/12 >> >> f1/13 = Cat3 f1/13 >> >> f1/14 = Cat2 f1/14 >> >> f1/15 = Cat2 f1/15 >> >> x = -35.0 >> >> y = 95.0 >> >> [[ROUTER Cat2]] >> >> model = 3725 >> >> console = 2014 >> >> idlepc = 0x6026b804 >> >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat2.cfg >> >> slot1 = NM-16ESW >> >> f1/0 = Cat1 f1/0 >> >> f1/1 = R1 f0/1 >> >> f1/2 = BB2 e0/0 >> >> f1/3 = BB3 e0/0 >> >> f1/6 = R6 f0/0 >> >> f1/7 = R7 f0/0 >> >> f1/8 = R8 f0/0 >> >> f1/9 = R9 f0/0 >> >> f1/10 = Cat3 f1/10 >> >> f1/11 = Cat3 f1/11 >> >> f1/12 = Cat4 f1/12 >> >> f1/13 = Cat4 f1/13 >> >> f1/14 = Cat1 f1/14 >> >> f1/15 = Cat1 f1/15 >> >> x = -39.0 >> >> y = 227.0 >> >> [[ROUTER Cat3]] >> >> model = 3725 >> >> console = 2015 >> >> idlepc = 0x62b22904 >> >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat3.cfg >> >> slot1 = NM-16ESW >> >> f1/2 = R2 f1/1 >> >> f1/4 = R4 f0/1 >> >> f1/5 = R5 f0/1 >> >> f1/10 = Cat2 f1/10 >> >> f1/11 = Cat2 f1/11 >> >> f1/12 = Cat1 f1/12 >> >> f1/13 = Cat1 f1/13 >> >> f1/14 = Cat4 f1/14 >> >> f1/15 = Cat4 f1/15 >> >> x = -211.0 >> >> y = 91.0 >> >> [[ROUTER Cat4]] >> >> model = 3725 >> >> console = 2016 >> >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat4.cfg >> >> slot1 = NM-16ESW >> >> f1/6 = R6 f0/1 >> >> f1/7 = R7 f0/1 >> >> f1/8 = R8 f0/1 >> >> f1/9 = R9 f0/1 >> >> f1/10 = Cat1 f1/10 >> >> f1/11 = Cat1 f1/11 >> >> f1/12 = Cat2 f1/12 >> >> f1/13 = Cat2 f1/13 >> >> f1/14 = Cat3 f1/14 >> >> f1/15 = Cat3 f1/15 >> >> x = -212.0 >> >> y = 224.0 >> >> [localhost:7201] >> >> workingdir = /home/duleep/DYNAMIPS/Working >> >> udp = 10100 >> >> [[3725]] >> >> ghostios = True >> >> image = >> >> >> /home/duleep/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T10.bin.unpacked >> >> ram = 256 >> >> sparsemem = True >> >> idlepc = 0x60c05928 >> >> [[ROUTER R4]] >> >> model = 3725 >> >> console = 2004 >> >> idlepc = 0x614ac21c >> >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R4.cfg >> >> s0/1 = FR-Switch 4 >> >> f0/0 = Cat1 f1/4 >> >> f0/1 = Cat3 f1/4 >> >> x = 48.0 >> >> y = -149.0 >> >> [[ROUTER R5]] >> >> model = 3725 >> >> console = 2005 >> >> idlepc = 0x62b22904 >> >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R5.cfg >> >> s0/1 = FR-Switch 5 >> >> s0/2 = R2 s0/2 >> >> f0/0 = Cat1 f1/5 >> >> f0/1 = Cat3 f1/5 >> >> x = -336.0 >> >> y = -28.0 >> >> [[ROUTER R1]] >> >> model = 3725 >> >> console = 2001 >> >> idlepc = 0x62b200d8 >> >> cnfg =/home/duleep/DYNAMIPS/Startup_Configs/R1.cfg >> >> f0/0 = Cat1 f1/1 >> >> f0/1 = Cat2 f1/1 >> >> x = 91.0 >> >> y = 163.0 >> >> [[ROUTER R2]] >> >> model = 3725 >> >> console = 2002 >> >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R2.cfg >> >> s0/1 = FR-Switch 2 >> >> s0/2 = R5 s0/2 >> >> slot1 = NM-16ESW >> >> f1/0 = Cat1 f1/2 >> >> f1/1 = Cat3 f1/2 >> >> x = -333.0 >> >> y = -169.0 >> >> [localhost:7204] >> >> workingdir = /home/duleep/DYNAMIPS/Working >> >> udp = 10400 >> >> [[2610]] >> >> image = >> >> /home/duleep/DYNAMIPS/IMAGES/c2600-jk9s-mz.122-23.bin.unpacked >> >> idlepc = 0x803d0d18 >> >> ghostios = True >> >> sparsemem = True >> >> chassis = 2610 >> >> [[FRSW FR-Switch]] >> >> 2:204 = 4:402 >> >> 2:205 = 5:502 >> >> 2:206 = 6:602 >> >> 2:214 = 4:412 >> >> 2:215 = 5:512 >> >> 2:216 = 6:612 >> >> 2:224 = 4:422 >> >> 2:225 = 5:522 >> >> 2:226 = 6:622 >> >> 4:402 = 2:204 >> >> 4:405 = 5:504 >> >> 4:406 = 6:604 >> >> 4:412 = 2:214 >> >> 4:415 = 5:514 >> >> 4:416 = 6:614 >> >> 4:422 = 2:224 >> >> 4:425 = 5:524 >> >> 4:426 = 6:624 >> >> 5:502 = 2:205 >> >> 5:504 = 4:405 >> >> 5:506 = 6:605 >> >> 5:512 = 2:215 >> >> 5:514 = 4:415 >> >> 5:516 = 6:615 >> >> 5:522 = 2:225 >> >> 5:524 = 4:425 >> >> 5:526 = 6:625 >> >> 6:602 = 2:206 >> >> 6:604 = 4:406 >> >> 6:605 = 5:506 >> >> 6:612 = 2:216 >> >> 6:614 = 4:416 >> >> 6:615 = 5:516 >> >> 6:622 = 2:226 >> >> 6:624 = 4:426 >> >> 6:625 = 5:526 >> >> x = -159.5 >> >> y = -91.5 >> >> [[ROUTER BB3]] >> >> model = 2610 >> >> console = 2013 >> >> idlepc = 0x802f9ab4 >> >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/BB1.cfg >> >> e0/0 = Cat2 f1/3 >> >> x = 9.0 >> >> y = 365.0 >> >> [[ROUTER BB2]] >> >> model = 2610 >> >> console = 2012 >> >> idlepc = 0x802f9a80 >> >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/BB2.cfg >> >> e0/0 = Cat2 f1/2 >> >> x = 137.0 >> >> y = 366.0 >> >> [[ROUTER BB1]] >> >> model = 2610 >> >> console = 2011 >> >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/BB3.cfg >> >> e0/0 = Cat1 f1/9 >> >> x = 255.0 >> >> y = 85.0 >> >> [GNS3-DATA] >> >> configs = /home/duleep/DYNAMIPS/Startup_Configs >> >> workdir = /home/duleep/DYNAMIPS/Working >> >> m11 = 0.5 >> >> m22 = 0.5 >> >> >> >> >> >> _______________________________________________ >> >> For more information regarding industry leading CCIE Lab training, >> please >> >> visit www.ipexpert.com >> >> >> > >> > >> >> >> ------------------------------ >> Windows Live Hotmail: Your friends can get your Facebook updates, right >> from >> Hotmail®.<http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_4:092009> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> > > > -- > With best regards, > Andrey 'sshd' Petrenko > xmmp: sshd at jabber.org > gtalk: andy.petrenko at gmail.com > skype: andy.petrenko > web: http://sshd.by > -- With best regards, Andrey 'sshd' Petrenko xmmp: sshd at jabber.org gtalk: andy.petrenko at gmail.com skype: andy.petrenko web: http://sshd.by
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
