Make sure you install the updates from the GNS3 site. I had the same problems until I installed them.
Justin G. Mitchell Sent from my G1 mobile phone On Oct 15, 2009 12:02 PM, "Duleep Pillai" <[email protected]> wrote: Hi All, Sorry for asking the same question again. Could not find a solution for this in the archives. I just installed a 64bit Ubuntu and am trying to run gns3. I cannot open the .net file pasted below (which is a customized IPExpert file). There is no error message. However, the same file is working on a 32 bit installation on a different machine. I can create a new project, but unable to save it either. Is there any permissions issue which I missed? I used the default installation process for Ubuntu and "sudo apt-get install gns3" for installing GNS3. Thanks, Duleep autostart = False [localhost:7202] workingdir = /home/duleep/DYNAMIPS/Working udp = 10200 [[3725]] ghostios = True image = /home/duleep/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T10.bin.unpacked ram = 256 sparsemem = True idlepc = 0x614ab070 [[ROUTER R6]] model = 3725 console = 2006 idlepc = 0x614ab0cc cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R6.cfg s0/1 = FR-Switch 6 f0/0 = Cat2 f1/6 f0/1 = Cat4 f1/6 slot2 = NM-4T s2/0 = R9 s2/0 s2/1 = R9 s2/1 x = 48.0 y = -37.0 [[ROUTER R7]] model = 3725 console = 2007 idlepc = 0x6026b438 cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R7.cfg s0/0 = R8 s0/0 f0/0 = Cat2 f1/7 f0/1 = Cat4 f1/7 x = -103.0 y = 365.0 [[ROUTER R8]] model = 3725 console = 2008 idlepc = 0x62b200d8 cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R8.cfg s0/0 = R7 s0/0 f0/0 = Cat2 f1/8 f0/1 = Cat4 f1/8 x = -304.0 y = 359.0 [[ROUTER R9]] model = 3725 console = 2009 cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R9.cfg f0/0 = Cat2 f1/9 f0/1 = Cat4 f1/9 slot2 = NM-4T s2/0 = R6 s2/0 s2/1 = R6 s2/1 x = 261.0 y = 331.0 [localhost:7203] workingdir = /home/duleep/DYNAMIPS/Working udp = 10300 [[3725]] ghostios = True image = /home/duleep/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T10.bin.unpacked ram = 256 sparsemem = True idlepc = 0x60c06d20 [[ROUTER Cat1]] model = 3725 console = 2010 idlepc = 0x60c059a8 cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat1.cfg slot1 = NM-16ESW f1/0 = Cat2 f1/0 f1/1 = R1 f0/0 f1/2 = R2 f1/0 f1/4 = R4 f0/0 f1/5 = R5 f0/0 f1/9 = BB1 e0/0 f1/10 = Cat4 f1/10 f1/11 = Cat4 f1/11 f1/12 = Cat3 f1/12 f1/13 = Cat3 f1/13 f1/14 = Cat2 f1/14 f1/15 = Cat2 f1/15 x = -35.0 y = 95.0 [[ROUTER Cat2]] model = 3725 console = 2014 idlepc = 0x6026b804 cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat2.cfg slot1 = NM-16ESW f1/0 = Cat1 f1/0 f1/1 = R1 f0/1 f1/2 = BB2 e0/0 f1/3 = BB3 e0/0 f1/6 = R6 f0/0 f1/7 = R7 f0/0 f1/8 = R8 f0/0 f1/9 = R9 f0/0 f1/10 = Cat3 f1/10 f1/11 = Cat3 f1/11 f1/12 = Cat4 f1/12 f1/13 = Cat4 f1/13 f1/14 = Cat1 f1/14 f1/15 = Cat1 f1/15 x = -39.0 y = 227.0 [[ROUTER Cat3]] model = 3725 console = 2015 idlepc = 0x62b22904 cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat3.cfg slot1 = NM-16ESW f1/2 = R2 f1/1 f1/4 = R4 f0/1 f1/5 = R5 f0/1 f1/10 = Cat2 f1/10 f1/11 = Cat2 f1/11 f1/12 = Cat1 f1/12 f1/13 = Cat1 f1/13 f1/14 = Cat4 f1/14 f1/15 = Cat4 f1/15 x = -211.0 y = 91.0 [[ROUTER Cat4]] model = 3725 console = 2016 cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat4.cfg slot1 = NM-16ESW f1/6 = R6 f0/1 f1/7 = R7 f0/1 f1/8 = R8 f0/1 f1/9 = R9 f0/1 f1/10 = Cat1 f1/10 f1/11 = Cat1 f1/11 f1/12 = Cat2 f1/12 f1/13 = Cat2 f1/13 f1/14 = Cat3 f1/14 f1/15 = Cat3 f1/15 x = -212.0 y = 224.0 [localhost:7201] workingdir = /home/duleep/DYNAMIPS/Working udp = 10100 [[3725]] ghostios = True image = /home/duleep/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T10.bin.unpacked ram = 256 sparsemem = True idlepc = 0x60c05928 [[ROUTER R4]] model = 3725 console = 2004 idlepc = 0x614ac21c cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R4.cfg s0/1 = FR-Switch 4 f0/0 = Cat1 f1/4 f0/1 = Cat3 f1/4 x = 48.0 y = -149.0 [[ROUTER R5]] model = 3725 console = 2005 idlepc = 0x62b22904 cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R5.cfg s0/1 = FR-Switch 5 s0/2 = R2 s0/2 f0/0 = Cat1 f1/5 f0/1 = Cat3 f1/5 x = -336.0 y = -28.0 [[ROUTER R1]] model = 3725 console = 2001 idlepc = 0x62b200d8 cnfg =/home/duleep/DYNAMIPS/Startup_Configs/R1.cfg f0/0 = Cat1 f1/1 f0/1 = Cat2 f1/1 x = 91.0 y = 163.0 [[ROUTER R2]] model = 3725 console = 2002 cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R2.cfg s0/1 = FR-Switch 2 s0/2 = R5 s0/2 slot1 = NM-16ESW f1/0 = Cat1 f1/2 f1/1 = Cat3 f1/2 x = -333.0 y = -169.0 [localhost:7204] workingdir = /home/duleep/DYNAMIPS/Working udp = 10400 [[2610]] image = /home/duleep/DYNAMIPS/IMAGES/c2600-jk9s-mz.122-23.bin.unpacked idlepc = 0x803d0d18 ghostios = True sparsemem = True chassis = 2610 [[FRSW FR-Switch]] 2:204 = 4:402 2:205 = 5:502 2:206 = 6:602 2:214 = 4:412 2:215 = 5:512 2:216 = 6:612 2:224 = 4:422 2:225 = 5:522 2:226 = 6:622 4:402 = 2:204 4:405 = 5:504 4:406 = 6:604 4:412 = 2:214 4:415 = 5:514 4:416 = 6:614 4:422 = 2:224 4:425 = 5:524 4:426 = 6:624 5:502 = 2:205 5:504 = 4:405 5:506 = 6:605 5:512 = 2:215 5:514 = 4:415 5:516 = 6:615 5:522 = 2:225 5:524 = 4:425 5:526 = 6:625 6:602 = 2:206 6:604 = 4:406 6:605 = 5:506 6:612 = 2:216 6:614 = 4:416 6:615 = 5:516 6:622 = 2:226 6:624 = 4:426 6:625 = 5:526 x = -159.5 y = -91.5 [[ROUTER BB3]] model = 2610 console = 2013 idlepc = 0x802f9ab4 cnfg = /home/duleep/DYNAMIPS/Startup_Configs/BB1.cfg e0/0 = Cat2 f1/3 x = 9.0 y = 365.0 [[ROUTER BB2]] model = 2610 console = 2012 idlepc = 0x802f9a80 cnfg = /home/duleep/DYNAMIPS/Startup_Configs/BB2.cfg e0/0 = Cat2 f1/2 x = 137.0 y = 366.0 [[ROUTER BB1]] model = 2610 console = 2011 cnfg = /home/duleep/DYNAMIPS/Startup_Configs/BB3.cfg e0/0 = Cat1 f1/9 x = 255.0 y = 85.0 [GNS3-DATA] configs = /home/duleep/DYNAMIPS/Startup_Configs workdir = /home/duleep/DYNAMIPS/Working m11 = 0.5 m22 = 0.5 _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
