Hello I had downgrade my to 2.6 from 2.8.1 and now I canuse brltty too But my is a alva bc640 and my tekniker has do this for me downgradeto 2.6 from 2.8 And dont test. To downgrade self I had test to upgrade and downgrade and the display was corrupt so I had to send to my tekniker to install it again So I recommend that you doit whit tekniker not self -----Ursprungligt meddelande----- Från: brltty-boun...@mielke.cc [mailto:brltty-boun...@mielke.cc] För Jason White Skickat: den 3 mars 2012 02:42 Till: brltty@mielke.cc Ämne: Re: [BRLTTY] Getting Alva BC680 to work...
Tami Kinney <tamara.8...@comcast.net> wrote: > If anyone else is using the BC680 with BRLTTY and Orca who would > like to give me an idiot level tutorial so I can get the machine up > and running while I have it here, I would appreciate. Some people on this list have managed to get the Alva BC640 working, but difficulties were encountered with the firmware as Dave indicated. I can't remember any mailing list posts about a BC680, but I could be wrong. I would expect the 640 and 680 to have very similar firmware, however. I read the list regularly, but I certainly don't remember everything that is posted. I personally use a display from Baum that works very well with BRLTTY. Alva have always had a very good reputation for the quality of their equipment. I don't know whether this has changed at all following their merger with Tieman to form Optelec, though. _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
