Hi, great, I have changed Media Type to LT0-4 and it works.
Thanks! -------- Original-Nachricht -------- > Datum: Sat, 9 Feb 2013 15:01:12 -0500 > Von: John Drescher <dresche...@gmail.com> > An: "Jürgen Ecker" <trex...@gmx.de> > CC: "RadosÅ‚aw Korzeniewski" <rados...@korzeniewski.net>, > bacula-users@lists.sourceforge.net > Betreff: Re: [Bacula-users] Autochanger Tandberg > On Sat, Feb 9, 2013 at 10:50 AM, "Jürgen Ecker" <trex...@gmx.de> wrote: > > Hi, > > > > thanks for help! See below. > > > > -------- Original-Nachricht -------- > >> Datum: Sat, 9 Feb 2013 14:52:40 +0100 > >> Von: "Radosław Korzeniewski" <rados...@korzeniewski.net> > >> An: "Jürgen Ecker" <trex...@gmx.de> > >> CC: bacula-users <bacula-users@lists.sourceforge.net> > >> Betreff: Re: [Bacula-users] Autochanger Tandberg > > > >> Hello, > >> > >> 2013/2/8 "Jürgen Ecker" <trex...@gmx.de> > >> > >> > Hi, > >> > > >> > i have another problem with our tape library. The problem is that i > get > >> > the following error. > >> > > >> > 94 Full Tape.2013-02-08_16.37.17_03 is waiting for an appendable > >> Volume > >> > > >> > > >> Your Bacula do not have a ready volume in required pool. Show us an > output > >> of the command: > >> * list media pool=Tape > >> > >> > >> > > > > Here the output: > > > > *list media pool=Tape > > Automatically selected Catalog: MyCatalog > > Using Catalog "MyCatalog" > > > +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+-------------+ > > | mediaid | volumename | volstatus | enabled | volbytes | volfiles | > volretention | recycle | slot | inchanger | mediatype | lastwritten | > > > +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+-------------+ > > | 183 | AAC720 | Append | 1 | 64,512 | 0 | > 2,419,200 | 1 | 1 | 1 | LT0-4 | | > > | 184 | AAC721 | Append | 1 | 64,512 | 0 | > 2,419,200 | 1 | 2 | 1 | LT0-4 | | > > | 185 | AAC731 | Append | 1 | 64,512 | 0 | > 2,419,200 | 1 | 3 | 1 | LT0-4 | | > > | 186 | AAC723 | Append | 1 | 64,512 | 0 | > 2,419,200 | 1 | 4 | 1 | LT0-4 | | > > | 187 | AAC724 | Append | 1 | 64,512 | 0 | > 2,419,200 | 1 | 5 | 1 | LT0-4 | | > > | 188 | AAC728 | Append | 1 | 64,512 | 0 | > 2,419,200 | 1 | 9 | 1 | LT0-4 | | > > | 189 | AAC729 | Append | 1 | 64,512 | 0 | > 2,419,200 | 1 | 10 | 1 | LT0-4 | | > > | 190 | AAC732 | Append | 1 | 64,512 | 0 | > 2,419,200 | 1 | 13 | 1 | LT0-4 | | > > | 191 | AAC733 | Append | 1 | 64,512 | 0 | > 2,419,200 | 1 | 14 | 1 | LT0-4 | | > > | 192 | AAC734 | Append | 1 | 64,512 | 0 | > 2,419,200 | 1 | 15 | 1 | LT0-4 | | > > | 193 | AAC735 | Append | 1 | 64,512 | 0 | > 2,419,200 | 1 | 16 | 1 | LT0-4 | | > > | 194 | AAC736 | Append | 1 | 64,512 | 0 | > 2,419,200 | 1 | 17 | 1 | LT0-4 | | > > | 195 | AAC737 | Append | 1 | 64,512 | 0 | > 2,419,200 | 1 | 18 | 1 | LT0-4 | | > > | 196 | AAC738 | Append | 1 | 64,512 | 0 | > 2,419,200 | 1 | 6 | 1 | LT0-4 | | > > > +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+-------------+ > > > >> > If i check the storage with stat->2: Storage->Autochanger it shows me > >> the > >> > following information: > >> > > >> > Device "LTO-4" (/dev/nst0) is mounted with: > >> > Volume: AAC720 > >> > Pool: Tape > >> > Media type: LT0 > >> > Device is BLOCKED waiting to create a volume for: > >> > Pool: Tape > >> > Media type: LT0 > >> > Slot 1 is loaded in drive 0. > >> > Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512 > >> > Positioned at File=0 Block=0 > >> > ==== > >> > > > Look at the media. They are all of type LT0-4 not LTO. So there is no > most likely no volume available. To fix make the volumes of type LT0. > > In bconsole > > update pool from resource > > then > > update all volumes in pool > > and follow the prompts. > > If you get any problem check the manual since I am going from memory > here.. > > John ------------------------------------------------------------------------------ Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
