Hello,
2013/2/8 "Jürgen Ecker" <trex...@gmx.de>
> Hi,
>
> i have another problem with our tape library. The problem is that i get
> the following error.
>
> 94 Full Tape.2013-02-08_16.37.17_03 is waiting for an appendable Volume
>
>
Your Bacula do not have a ready volume in required pool. Show us an output
of the command:
* list media pool=Tape
> If i check the storage with stat->2: Storage->Autochanger it shows me the
> following information:
>
> Device "LTO-4" (/dev/nst0) is mounted with:
> Volume: AAC720
> Pool: Tape
> Media type: LT0
> Device is BLOCKED waiting to create a volume for:
> Pool: Tape
> Media type: LT0
> Slot 1 is loaded in drive 0.
> Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
> Positioned at File=0 Block=0
> ====
>
>
What is the status of volume AAC720? Append? Full? Used? Error?
> Used Volume status:
> AAC720 on device "LTO-4" (/dev/nst0)
> Reader=0 writers=0 devres=1 volinuse=0
>
> The tape library supports a barcodescanner and i have labeled the tapes
> with "label barcodes".
>
>
Did you label all available tapes?
> Why it hangs? I don´t want to label a volume by hand. It should be auto
> labeled. What is wrong in my configuration.
>
>
What do you mean by "auto labeled"? Autolabel is working only when using a
disk/file type volumes. When you are using tapes then you have to label
tapes manually using i.e. label barcodes console command.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
------------------------------------------------------------------------------
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013
and get the hardware for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
