Hi, thanks for help! See below.
-------- Original-Nachricht -------- > Datum: Sat, 9 Feb 2013 14:52:40 +0100 > Von: "Radosław Korzeniewski" <rados...@korzeniewski.net> > An: "Jürgen Ecker" <trex...@gmx.de> > CC: bacula-users <bacula-users@lists.sourceforge.net> > Betreff: Re: [Bacula-users] Autochanger Tandberg > Hello, > > 2013/2/8 "Jürgen Ecker" <trex...@gmx.de> > > > Hi, > > > > i have another problem with our tape library. The problem is that i get > > the following error. > > > > 94 Full Tape.2013-02-08_16.37.17_03 is waiting for an appendable > Volume > > > > > Your Bacula do not have a ready volume in required pool. Show us an output > of the command: > * list media pool=Tape > > > Here the output: *list media pool=Tape Automatically selected Catalog: MyCatalog Using Catalog "MyCatalog" +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+-------------+ | mediaid | volumename | volstatus | enabled | volbytes | volfiles | volretention | recycle | slot | inchanger | mediatype | lastwritten | +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+-------------+ | 183 | AAC720 | Append | 1 | 64,512 | 0 | 2,419,200 | 1 | 1 | 1 | LT0-4 | | | 184 | AAC721 | Append | 1 | 64,512 | 0 | 2,419,200 | 1 | 2 | 1 | LT0-4 | | | 185 | AAC731 | Append | 1 | 64,512 | 0 | 2,419,200 | 1 | 3 | 1 | LT0-4 | | | 186 | AAC723 | Append | 1 | 64,512 | 0 | 2,419,200 | 1 | 4 | 1 | LT0-4 | | | 187 | AAC724 | Append | 1 | 64,512 | 0 | 2,419,200 | 1 | 5 | 1 | LT0-4 | | | 188 | AAC728 | Append | 1 | 64,512 | 0 | 2,419,200 | 1 | 9 | 1 | LT0-4 | | | 189 | AAC729 | Append | 1 | 64,512 | 0 | 2,419,200 | 1 | 10 | 1 | LT0-4 | | | 190 | AAC732 | Append | 1 | 64,512 | 0 | 2,419,200 | 1 | 13 | 1 | LT0-4 | | | 191 | AAC733 | Append | 1 | 64,512 | 0 | 2,419,200 | 1 | 14 | 1 | LT0-4 | | | 192 | AAC734 | Append | 1 | 64,512 | 0 | 2,419,200 | 1 | 15 | 1 | LT0-4 | | | 193 | AAC735 | Append | 1 | 64,512 | 0 | 2,419,200 | 1 | 16 | 1 | LT0-4 | | | 194 | AAC736 | Append | 1 | 64,512 | 0 | 2,419,200 | 1 | 17 | 1 | LT0-4 | | | 195 | AAC737 | Append | 1 | 64,512 | 0 | 2,419,200 | 1 | 18 | 1 | LT0-4 | | | 196 | AAC738 | Append | 1 | 64,512 | 0 | 2,419,200 | 1 | 6 | 1 | LT0-4 | | +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+-------------+ > > If i check the storage with stat->2: Storage->Autochanger it shows me > the > > following information: > > > > Device "LTO-4" (/dev/nst0) is mounted with: > > Volume: AAC720 > > Pool: Tape > > Media type: LT0 > > Device is BLOCKED waiting to create a volume for: > > Pool: Tape > > Media type: LT0 > > Slot 1 is loaded in drive 0. > > Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512 > > Positioned at File=0 Block=0 > > ==== > > > > > What is the status of volume AAC720? Append? Full? Used? Error? > If I execute "*list media pool=Tape" then you can see that the status of AAC720 is Append. > > > Used Volume status: > > AAC720 on device "LTO-4" (/dev/nst0) > > Reader=0 writers=0 devres=1 volinuse=0 > > > > The tape library supports a barcodescanner and i have labeled the tapes > > with "label barcodes". > > > > > Did you label all available tapes? > Yes i think. If i retry "label barcodes" bacula says: Media record for Slot 1 Volume "AAC720" already exists. Media record for Slot 2 Volume "AAC721" already exists. Media record for Slot 3 Volume "AAC731" already exists. Media record for Slot 4 Volume "AAC723" already exists. Media record for Slot 5 Volume "AAC724" already exists. Media record for Slot 6 Volume "AAC738" already exists. Media record for Slot 9 Volume "AAC728" already exists. Media record for Slot 10 Volume "AAC729" already exists. Media record for Slot 13 Volume "AAC732" already exists. Media record for Slot 14 Volume "AAC733" already exists. Media record for Slot 15 Volume "AAC734" already exists. Media record for Slot 16 Volume "AAC735" already exists. Media record for Slot 17 Volume "AAC736" already exists. Media record for Slot 18 Volume "AAC737" already exists. There are no errors and no new labeled tapes. > > > Why it hangs? I don´t want to label a volume by hand. It should be auto > > labeled. What is wrong in my configuration. > > > > > What do you mean by "auto labeled"? Autolabel is working only when using a > disk/file type volumes. When you are using tapes then you have to label > tapes manually using i.e. label barcodes console command. I was confused. Disregard this question. Do you have any ideas? best regards ------------------------------------------------------------------------------ Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
