Zitat von Dan Langille <d...@langille.org>: > On 2012-06-27 11:17, Jens Grüntjes wrote: > > Those are the good first steps. Hopefully, all else is good too. > > Does load, loaded, and unload work? > > Permissions are another issue. Can Bacula access /dev/sg4, for > example? Can bacula-sd run mtx-changer? > > label barcodes? That is the read test! > > If all the commands work, no training is required. Sometimes, you > need to add a sleep 120 (or similar value) to give the tape library > time to settle after a tape load. Sometimes not. It varies. > > Best practice is to run the btape tests first. This will optionally > exercise the tape change. > > Here is the 'training' I did: http://www.freebsddiary.org/tape-library.php > > -- > Dan Langille - http://langille.org/
Thanks for the help, the backups are all running fine. The tape in slot 8 has already been used for a backup so I think there is no further training required. Greetings -- Jens ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
