Op 20120626 om 08:24 schreef Jens Gruentjes: > > When I log in into the web interface I see 8 usable slots. This is > where I told the changer that my former cleaning slot number 8 is no > longer a cleaning slot. On the Status-page I see the two magazines > with 4 tapes each. There is no cleaning slot defined, i.e. I set the > cleaning slot to 0 which is what the manual suggests. > > I did a firmware upgrade hoping that this will fix my problem. I > encountered something strange as the following command (/dev/sg4 is > the changer) gives two different outputs: > > boromir ~/tdtool # mtx -f /dev/sg4 status > RequestSense (0x03) failed > mtx: Request Sense: Long Report=yes > mtx: Request Sense: Valid Residual=no > mtx: Request Sense: Error Code=70 (Current) > mtx: Request Sense: Sense Key=Unit Attention > mtx: Request Sense: FileMark=no > mtx: Request Sense: EOM=no > mtx: Request Sense: ILI=no > mtx: Request Sense: Additional Sense Code = 28 > mtx: Request Sense: Additional Sense Qualifier = 00 > mtx: Request Sense: BPV=no > mtx: Request Sense: Error in CDB=no > mtx: Request Sense: SKSV=no > Mode sense (0x1A) for Page 0x1D failed > Storage Changer /dev/sg4:1 Drives, 8 Slots ( 0 Import/Export ) > Data Transfer Element 0:Full (Storage Element 3 Loaded):VolumeTag = WOC4-03L4 > Storage Element 1:Full :VolumeTag=WOC4-01L4 > Storage Element 2:Full :VolumeTag=WOC4-02L4 > Storage Element 3:Empty > Storage Element 4:Full :VolumeTag=WOC5-01L4 > Storage Element 5:Full :VolumeTag=WOC5-02L4 > Storage Element 6:Full :VolumeTag=WOC5-03L4 > Storage Element 7:Full :VolumeTag=WOC1-01L4 > Storage Element 8:Full :VolumeTag=WOC1-02L4 > > boromir ~/tdtool # mtx -f /dev/sg4 status > Storage Changer /dev/sg4:1 Drives, 7 Slots ( 0 Import/Export ) > Data Transfer Element 0:Full (Storage Element 3 Loaded):VolumeTag = WOC4-03L4 > Storage Element 1:Full :VolumeTag=WOC4-01L4 > Storage Element 2:Full :VolumeTag=WOC4-02L4 > Storage Element 3:Empty > Storage Element 4:Full :VolumeTag=WOC5-01L4 > Storage Element 5:Full :VolumeTag=WOC5-02L4 > Storage Element 6:Full :VolumeTag=WOC5-03L4 > Storage Element 7:Full :VolumeTag=WOC1-01L4 > > The two commands were issued directly one after another because I > worried about the first responses of the changer (RequestSense (0x03) > failed ...).
FWIW: It does remember me on SCSI cable termination problems. I would check and double check the cables and especially the terminators. Cheers Geert Stappers -- http://www.vanadplatform.com/ ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
