Hello,
2012/6/26 Jens Gruentjes <jens.gruent...@ebira.de>
> boromir ~/tdtool # mtx -f /dev/sg4 status
> RequestSense (0x03) failed
> mtx: Request Sense: Long Report=yes
> mtx: Request Sense: Valid Residual=no
> mtx: Request Sense: Error Code=70 (Current)
> mtx: Request Sense: Sense Key=Unit Attention
> mtx: Request Sense: FileMark=no
> mtx: Request Sense: EOM=no
> mtx: Request Sense: ILI=no
> mtx: Request Sense: Additional Sense Code = 28
> mtx: Request Sense: Additional Sense Qualifier = 00
> mtx: Request Sense: BPV=no
> mtx: Request Sense: Error in CDB=no
> mtx: Request Sense: SKSV=no
> Mode sense (0x1A) for Page 0x1D failed
> Storage Changer /dev/sg4:1 Drives, 8 Slots ( 0 Import/Export )
> Data Transfer Element 0:Full (Storage Element 3 Loaded):VolumeTag =
> WOC4-03L4
> Storage Element 1:Full :VolumeTag=WOC4-01L4
> Storage Element 2:Full :VolumeTag=WOC4-02L4
> Storage Element 3:Empty
> Storage Element 4:Full :VolumeTag=WOC5-01L4
> Storage Element 5:Full :VolumeTag=WOC5-02L4
> Storage Element 6:Full :VolumeTag=WOC5-03L4
> Storage Element 7:Full :VolumeTag=WOC1-01L4
> Storage Element 8:Full :VolumeTag=WOC1-02L4
>
>
Check this out! 8 slots reported :)
boromir ~/tdtool # mtx -f /dev/sg4 status
> Storage Changer /dev/sg4:1 Drives, 7 Slots ( 0 Import/Export )
> Data Transfer Element 0:Full (Storage Element 3 Loaded):VolumeTag =
> WOC4-03L4
> Storage Element 1:Full :VolumeTag=WOC4-01L4
> Storage Element 2:Full :VolumeTag=WOC4-02L4
> Storage Element 3:Empty
> Storage Element 4:Full :VolumeTag=WOC5-01L4
> Storage Element 5:Full :VolumeTag=WOC5-02L4
> Storage Element 6:Full :VolumeTag=WOC5-03L4
> Storage Element 7:Full :VolumeTag=WOC1-01L4
>
>
Wow, 7 slots again. Do you delete a last line? :) Just kidding.
> The two commands were issued directly one after another because I
> worried about the first responses of the changer (RequestSense (0x03)
> failed ...).
>
>
Please, hard reset your changer (off/on), check all connections, check all
firmware options which could disable one slot - cleaning slot, etc. Then
check library status with mtx again. It should work. If not, check you HBA
firmware and OS driver.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
