Kern Sibbald wrote:
> On Monday 02 April 2007 14:34, Brian Debelius wrote:
>> Windows 2003, dir, sd, fd; Bacula 2.0.3; VXA-172
>
> Nice, I wish everyone would put a line like that -- it gets you a "free"
> answer :-)
>
>> What would cause bacula to run a job, load the correct tape(in this case
>> B0000001) , and then say intervention needed please mount volume
>> (B0000001)? Then I manually have to umount the tape, then mount the
>> same tape again, and the job runs?
>
> Generally if Bacula asks you to mount a tape it is because either you don't
> have an autochanger or the wrong tape is in the drive. Once you mount the
> tape it requests (in general) you will need to issue a "mount" command in the
> console so that Bacula will read the tape label and continue ...
>
>
> (in general) means that it depends on your conf file.
Thanks! :)
I in fact do have an autochanger, and it loaded the correct tape
autmomatically. You can see that it unloaded slot 7 and then loaded
slot 3. I verified this with mtx-changer list and saw that the correct
tape was loaded. When I unmount the tape, it gets unloaded back to the
changer, and then I mount it again, and it proceeds to do its job.
Would I enable debugging on the director or the sd to troubleshoot this?
Heres the log before and after I remounted the tape
02-Apr 00:01 comp0-dir: Start Backup JobId 200,
Job=comp1.2007-04-02_00.01.00
02-Apr 00:01 comp0-dir: Using Volume "B0000001" from 'Scratch' pool.
02-Apr 00:01 comp0-dir: Start Backup JobId 201,
Job=comp2.2007-04-02_00.01.05
02-Apr 00:01 comp1-fd: ClientRunBeforeJob: run command "ntbackup backup
systemstate /F c:\comp1_systemstate.bkf"
02-Apr 00:01 comp2-fd: ClientRunBeforeJob: run command "ntbackup backup
systemstate /F c:\comp2_systemstate.bkf"
02-Apr 00:11 comp0-sd: 3307 Issuing autochanger "unload slot 7, drive 0"
command.
02-Apr 00:14 comp0-sd: 3304 Issuing autochanger "load slot 3, drive 0"
command.
02-Apr 00:15 comp0-sd: 3305 Autochanger "load slot 3, drive 0", status
is OK.
02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
02-Apr 00:15 comp0-sd: Please mount Volume "B0000001" on Storage Device
"VXA-172" (Tape0) for Job comp1.2007-04-02_00.01.00
02-Apr 01:15 comp0-sd: Please mount Volume "B0000001" on Storage Device
"VXA-172" (Tape0) for Job comp1.2007-04-02_00.01.00
02-Apr 03:15 comp0-sd: Please mount Volume "B0000001" on Storage Device
"VXA-172" (Tape0) for Job comp1.2007-04-02_00.01.00
02-Apr 07:15 comp0-sd: Please mount Volume "B0000001" on Storage Device
"VXA-172" (Tape0) for Job comp1.2007-04-02_00.01.00
#unmount
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog"
The defined Storage resources are:
1: Disk0
2: Disk1
3: Tape
Select Storage resource (1-3): Unexpected question has been received.
3
3307 Issuing autochanger "unload slot 3, drive 0" command.
3001 Device "VXA-172" (Tape0) unmounted.
#mount
The defined Storage resources are:
1: Disk0
2: Disk1
3: Tape
Select Storage resource (1-3): Unexpected question has been received.
3
Enter autochanger slot: Unexpected question has been received.
3
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3304 Issuing autochanger "load slot 3, drive 0" command.
3305 Autochanger "load slot 3, drive 0", status is OK.
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result is Slot 3.
3001 Device "VXA-172" (Tape0) is mounted with Volume "B0000001"
02-Apr 08:23 elkton-sd: 3301 Issuing autochanger "loaded? drive 0" command.
02-Apr 08:23 elkton-sd: 3302 Autochanger "loaded? drive 0", result is
Slot 3.
02-Apr 08:23 elkton-sd: 3301 Issuing autochanger "loaded? drive 0" command.
02-Apr 08:23 elkton-sd: 3302 Autochanger "loaded? drive 0", result is
Slot 3.
02-Apr 08:23 elkton-sd: Wrote label to prelabeled Volume "B0000001" on
device "VXA-172" (Tape0)
02-Apr 08:23 elkton-sd: Spooling data ...
02-Apr 08:23 elkton-sd: Spooling data ...
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
