Hi,
On 4/2/2007 5:17 PM, Brian Debelius wrote:
> Brian Debelius wrote:
>> Kern Sibbald wrote:
>>> On Monday 02 April 2007 14:34, Brian Debelius wrote:
>>>> Windows 2003, dir, sd, fd; Bacula 2.0.3; VXA-172
>>> Nice, I wish everyone would put a line like that -- it gets you a "free"
>>> answer :-)
>>>
>>>> What would cause bacula to run a job, load the correct tape(in this case
>>>> B0000001) , and then say intervention needed please mount volume
>>>> (B0000001)? Then I manually have to umount the tape, then mount the
>>>> same tape again, and the job runs?
>>> Generally if Bacula asks you to mount a tape it is because either you don't
>>> have an autochanger or the wrong tape is in the drive. Once you mount the
>>> tape it requests (in general) you will need to issue a "mount" command in
>>> the
>>> console so that Bacula will read the tape label and continue ...
>>>
>>>
>>> (in general) means that it depends on your conf file.
>> Thanks! :)
Is it possible that in your mtx-changer script (whatever that is called
in windows :-) you don't have the wait_for_drive function enabled? The
error looks like it might be a timeout problem... i.e. Bacula tries to
access the tape before the drive has finished loading it.
If the windows' mtx-changer looks similar to the unix one, you can
easily find where the command load is processed. There, a wait time will
be effective. Hopefully there is a comment indicating how to enable a
more reliable drive status checking - it might not need more than
removing a comment character.
>> I in fact do have an autochanger, and it loaded the correct tape
>> autmomatically. You can see that it unloaded slot 7 and then loaded
>> slot 3. I verified this with mtx-changer list and saw that the correct
>> tape was loaded. When I unmount the tape, it gets unloaded back to the
>> changer, and then I mount it again, and it proceeds to do its job.
>> Would I enable debugging on the director or the sd to troubleshoot this?
>>
>> Heres the log before and after I remounted the tape
>>
>> 02-Apr 00:01 comp0-dir: Start Backup JobId 200,
>> Job=comp1.2007-04-02_00.01.00
>> 02-Apr 00:01 comp0-dir: Using Volume "B0000001" from 'Scratch' pool.
>> 02-Apr 00:01 comp0-dir: Start Backup JobId 201,
>> Job=comp2.2007-04-02_00.01.05
>> 02-Apr 00:01 comp1-fd: ClientRunBeforeJob: run command "ntbackup backup
>> systemstate /F c:\comp1_systemstate.bkf"
>> 02-Apr 00:01 comp2-fd: ClientRunBeforeJob: run command "ntbackup backup
>> systemstate /F c:\comp2_systemstate.bkf"
>> 02-Apr 00:11 comp0-sd: 3307 Issuing autochanger "unload slot 7, drive 0"
>> command.
>> 02-Apr 00:14 comp0-sd: 3304 Issuing autochanger "load slot 3, drive 0"
>> command.
>> 02-Apr 00:15 comp0-sd: 3305 Autochanger "load slot 3, drive 0", status
>> is OK.
>> 02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
>> 02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
>> 02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
>> 02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
>> 02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
>> 02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
>> 02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
>> 02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
>> 02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
>> 02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
>> 02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
>> 02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
>> 02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
>> 02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
>> 02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
>> 02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
>> 02-Apr 00:15 comp0-sd: 3301 Issuing autochanger "loaded? drive 0" command.
>> 02-Apr 00:15 comp0-sd: 3302 Autochanger "loaded? drive 0", result is Slot 3.
These many tries... checks what's loaded, and rechecks, and rechecks...
possibly because in between there were problems reading the tape?
Arno
>> 02-Apr 00:15 comp0-sd: Please mount Volume "B0000001" on Storage Device
>> "VXA-172" (Tape0) for Job comp1.2007-04-02_00.01.00
>> 02-Apr 01:15 comp0-sd: Please mount Volume "B0000001" on Storage Device
>> "VXA-172" (Tape0) for Job comp1.2007-04-02_00.01.00
>> 02-Apr 03:15 comp0-sd: Please mount Volume "B0000001" on Storage Device
>> "VXA-172" (Tape0) for Job comp1.2007-04-02_00.01.00
>> 02-Apr 07:15 comp0-sd: Please mount Volume "B0000001" on Storage Device
>> "VXA-172" (Tape0) for Job comp1.2007-04-02_00.01.00
>> #unmount
>> Automatically selected Catalog: MyCatalog
>> Using Catalog "MyCatalog"
>> The defined Storage resources are:
>> 1: Disk0
>> 2: Disk1
>> 3: Tape
>> Select Storage resource (1-3): Unexpected question has been received.
>> 3
>> 3307 Issuing autochanger "unload slot 3, drive 0" command.
>> 3001 Device "VXA-172" (Tape0) unmounted.
>> #mount
>> The defined Storage resources are:
>> 1: Disk0
>> 2: Disk1
>> 3: Tape
>> Select Storage resource (1-3): Unexpected question has been received.
>> 3
>> Enter autochanger slot: Unexpected question has been received.
>> 3
>> 3301 Issuing autochanger "loaded? drive 0" command.
>> 3302 Autochanger "loaded? drive 0", result: nothing loaded.
>> 3304 Issuing autochanger "load slot 3, drive 0" command.
>> 3305 Autochanger "load slot 3, drive 0", status is OK.
>> 3301 Issuing autochanger "loaded? drive 0" command.
>> 3302 Autochanger "loaded? drive 0", result is Slot 3.
>> 3001 Device "VXA-172" (Tape0) is mounted with Volume "B0000001"
>> 02-Apr 08:23 elkton-sd: 3301 Issuing autochanger "loaded? drive 0" command.
>> 02-Apr 08:23 elkton-sd: 3302 Autochanger "loaded? drive 0", result is
>> Slot 3.
>> 02-Apr 08:23 elkton-sd: 3301 Issuing autochanger "loaded? drive 0" command.
>> 02-Apr 08:23 elkton-sd: 3302 Autochanger "loaded? drive 0", result is
>> Slot 3.
>> 02-Apr 08:23 elkton-sd: Wrote label to prelabeled Volume "B0000001" on
>> device "VXA-172" (Tape0)
>> 02-Apr 08:23 elkton-sd: Spooling data ...
>> 02-Apr 08:23 elkton-sd: Spooling data ...
> Here is my sd.
>
> ################################
> # Definition of tape storage device
> ################################
> Autochanger {
> Name = "Packetloader0"
> Device = "VXA-172"
> Changer Device = Changer0
> Changer Command = "\"C:\\Program Files\\Bacula\\bin\\\"mtx-changer %c
> %o %S %a %d"
> }
>
> Device {
> Name = "VXA-172"
> Drive Index =0
> Device Type = Tape
> Archive Device = Tape0
> Changer Device = Changer0
> LabelMedia = yes
> AutomaticMount = yes
> AlwaysOpen = no
> RemovableMedia = yes
> RandomAccess = no
> Hardware End of File = no
> Media Type = X10
> Autochanger = yes
> Autoselect = yes
> Minimum Block Size = 1024
> Maximum Block Size = 245760
> Changer Command = "\"C:\\Program Files\\Bacula\\bin\\\"mtx-changer %c
> %o %S %a %d"
> Spool directory = "d:\\bacula\\spool"
> }
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
--
IT-Service Lehmann [EMAIL PROTECTED]
Arno Lehmann http://www.its-lehmann.de
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
