At Wed, 16 Jan 2002 14:08:58 +0100, Thomas Tonino wrote: > > Hi Olivier , > > > > > I have a cmi 8738 card and would like to use the spdif in/out > >features. The driver from cmi is not ready for this, so I downloaded > >the last CVS version of alsa; 2002-01-11.tar.bz2, compiled it, > > > > inserted the module trying "playback_spdif=yes" or "spdif_enable=yes" > >with no success. > > > You should be able to get signal when you enable spdif out and spdif dac > to spdif options in alsamixer. However with my card the sound is totally > distorted. Unuseable. > > So I use the driver delivered with kernel 2.4.17. This driver has > correct spdif output, enabled automatically when 44.1 of 48 KHz sampling > rate audio is played.
interesting.. are you using MC6 model? which module options did you set to OSS cmpci driver? looking at the code of oss driver, it sets "DAC To Out" bit when the chip version is 39 or later (and toggled off on ac3 mode). there is nothing special except for that when no module options are set. i'm not sure whether this matters... Takashi _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
