Thanks Trey! Were you also testing Siklu -> Tibit? On Mon, Mar 6, 2023 at 2:35 PM Trey Scarborough <[email protected]> wrote:
> Carl I am pretty sure that is the same cable I used to test a Tbit to > radio connection and I didn't have any issues. Also I know they work in > the CRS305-1G-4S+IN. > On 3/3/2023 9:49 AM, Carl Peterson wrote: > > I'm not doing liquid cooling. See the pics I posted above. Just need to > extend the SFP+ cage out of a Siklu radio. The alternative is to add > another little switch but that adds complexity to what is a simple design. > PON hanging off a Siklu for a small apartment building. Only thing active > is the Siklu and the "SFP". One cyber power 48V battery backup to power > the silku. If you add a switch, how are you powering it, where is it > mounted, etc. > > On the note of adding a switch. Has anyone used the CRS305-1G-4S+IN? > Anyone have a contact at Mikrotiik who could find out the SFP+ port's power > budget? > > On Fri, Mar 3, 2023 at 9:32 AM <[email protected]> wrote: > >> I’m curious what Carl Peterson is doing too. >> >> The description on the linked item says it’s so you can put your >> electronics into immersed liquid cooling without exposing your optics to >> the liquid. Pretty esoteric stuff. >> >> >> >> Not understanding the use case, but assuming there’s a reason you can’t >> extend the fiber a few feet with a jumper and mating sleeve, then how about >> use a DAC to reach another switch? >> >> >> >> >> >> *From:* AF <[email protected]> *On Behalf Of *Zach Underwood >> *Sent:* Friday, March 03, 2023 9:58 AM >> *To:* AnimalFarm Microwave Users Group <[email protected]> >> *Subject:* Re: [AFMUG] SFP+ cage extender >> >> >> >> I am curious what the application is that a longer cable would not >> address? I have never heard of such a device. >> >> >> >> On Fri, Mar 3, 2023 at 9:56 AM Carl Peterson <[email protected]> >> wrote: >> >> I have an application where I need to extend a SFP+ cage a foot or two >> but need 3.5W peak and 2.7W continuous power. The existing device supports >> the power but the only SFP+ cage extender I can find is only rated at >> 2.5W. Can you passively just extend the cage pins or is this something >> that requires electronics? Anyone know of a higher power SFP extension >> cable? >> >> >> >> >> https://www.sfpcables.com/sfp-to-sfp-cage-with-3m-flat-cable-in-nylon-jacket-20cm-and-55cm-length-3256-5454 >> >> >> >> >> >> -- >> >> Carl Peterson >> >> *PORT NETWORKS* >> >> 401 E Pratt St, Ste 2553 >> >> Baltimore, MD 21202 >> >> (410) 637-3707 >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> >> >> -- >> >> Zach Underwood (RHCE,RHCSA,RHCT,UACA) >> >> My website <http://zachunderwood.me> >> >> advance-networking.com >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > > Carl Peterson > > *PORT NETWORKS* > > 401 E Pratt St, Ste 2553 > > Baltimore, MD 21202 > > (410) 637-3707 > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
