All documentation I find says it's only sfp. But if it doesnt workwouldnt it not ID or power?
On Fri, Sep 24, 2021, 6:22 PM Mathew Howard <mhoward...@gmail.com> wrote: > Will an sfp+ module generally work in an sfp port? I'd be surprised if the > Integra has sfp+ > > On Fri, Sep 24, 2021, 4:33 PM <dmmoff...@gmail.com> wrote: > >> If you don’t have a ferrule cleaner you can wipe off the ends of the >> patch cable with an alcohol wipe, but I have no idea how you clean the >> female connectors without the tool. >> >> -Adam >> >> >> >> >> >> *From:* dmmoff...@gmail.com <dmmoff...@gmail.com> >> *Sent:* Friday, September 24, 2021 5:18 PM >> *To:* 'AnimalFarm Microwave Users Group' <af@af.afmug.com> >> *Subject:* RE: [AFMUG] SFP questions >> >> >> >> That “Rx Lose” checkbox at the top on the Mikrotik means there’s no Rx >> signal. >> >> The other device shows Rx power of 0 >> >> >> >> If you know it’s physically connected, but there’s no Rx signal on either >> end then I’d wonder if you need to flip-flip the tx/rx on one end. >> …..sounds like you already tried that though. >> >> >> >> Did you clean the connectors? A spec of invisible dirt can stop you. >> >> >> https://www.amazon.com/Cleaning-1-25mm-Ferrule-Connectors-Cleaner/dp/B07Z2ST9GD >> >> >> >> >> >> >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Steve Jones >> *Sent:* Friday, September 24, 2021 5:04 PM >> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >> *Subject:* [AFMUG] SFP questions >> >> >> >> Im using my SFPs I have for the Aviat radios to connect between a SAF >> integra and a CRS309. >> >> >> >> There are two integras 2+0, we lost the original switch that had the >> original SFPs in them. So I took the horizontal radio SFP and paired it in >> the CRS and that radio links up fine. >> >> >> >> However, the SFPs I have for the Aviats dont seem to work. At first I >> figured it was just incompatibility (I dont recall if the Integra is SFP or >> SFP+, these are SFP+) >> >> >> >> In the attached image, both units recognize the SFP and claim to be >> transmitting light. Even if there was incompatibility with the SFP, >> shouldnt there be an RX? or if they cant negotiate for whatever reason >> would it not show an RX? >> >> >> >> I did swap the Fiber ends, I havent tried a different cable, though this >> was brand new from Aviat. >> >> >> >> Would I be correct to assume that if the Devices populate the info >> fields, then the SFP should at least connect, even if the the data channel >> doesnt work due to incompatibility with the hardware? >> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
