Im using my SFPs I have for the Aviat radios to connect between a SAF integra and a CRS309.
There are two integras 2+0, we lost the original switch that had the original SFPs in them. So I took the horizontal radio SFP and paired it in the CRS and that radio links up fine. However, the SFPs I have for the Aviats dont seem to work. At first I figured it was just incompatibility (I dont recall if the Integra is SFP or SFP+, these are SFP+) In the attached image, both units recognize the SFP and claim to be transmitting light. Even if there was incompatibility with the SFP, shouldnt there be an RX? or if they cant negotiate for whatever reason would it not show an RX? I did swap the Fiber ends, I havent tried a different cable, though this was brand new from Aviat. Would I be correct to assume that if the Devices populate the info fields, then the SFP should at least connect, even if the the data channel doesnt work due to incompatibility with the hardware? [image: image.png]
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
