See attached debug log. (Transfered via USB pendrive from the plan9 machine, so at least that part seems to work)
On 13 October 2010 16:04, Thorben Krueger <thkru...@googlemail.com> wrote: > wow, this produces an incredible amount of text... typing it is not an > option... let me see if I can figure something out > > On 13 October 2010 15:57, Francisco J Ballesteros <n...@lsub.org> wrote: >> kill usbd, yes, it's not supported. I mean, if you kill it and it fails, >> the man page says that you are not supposed to do that. But do it anyway :) >> >> Then, usb/usbd -dd >> and see what happens. >> >> BTW I assume that you are not using a usb kbd/mouse to execute such commands. >> If you are, then we can set usbdebug in plan9.ini, IIRC, and go from there. >> >> >> On Wed, Oct 13, 2010 at 3:42 PM, Thorben Krueger >> <thkru...@googlemail.com> wrote: >>> Ok, when I reboot (I don't know how to reset usdb) and run usb/usbd -dd I >>> get: >>> ... >>> usb/usbd: /dev/usb/ep5.0 starting >>> usb/usbd: opendev 0x60b90 /dev/usb/ep5.0 >>> usb/usbd: /dev/usb/ep5.0: no port information >>> usb/usbd: /dev/usb/ep5.0: ports 2 maxpkt 64 >>> >>> What now? >>> >>> On 13 October 2010 15:31, Francisco J Ballesteros <n...@lsub.org> wrote: >>>> It seems usbd is not getting the descriptors it needs. >>>> You may try running usbd -dd to see which requests >>>> have problems. >>>> We could try to see how to proceed then, depending >>>> on what's going on. >>>> >>>> On Wed, Oct 13, 2010 at 3:21 PM, Thorben Krueger >>>> <thkru...@googlemail.com> wrote: >>>>> I configured my mobile phone to share all it's connectivity (gprs, >>>>> wifi) via usb, i.e., act as a usb router (including a dhcp server). >>>>> >>>>> When I attach it to a linux machine, dmesg says: >>>>> >>>>> usb 2-2: new high speed USB device using ehci_hcd and address 14 >>>>> cdc_acm 2-2:1.6: This device cannot do calls on its own. It is not a >>>>> modem. >>>>> cdc_acm 2-2:1.6: ttyACM0: USB ACM device >>>>> cdc_ether 2-2:1.8: usb0: register 'cdc_ether' at usb-0000:00:1d.7-2, >>>>> CDC Ethernet Device, da:fc:05:9a:bd:95 >>>>> >>>>> then I simply do "ifconfig usb0 up; dhcpcd usb0" and I have connectivity. >>>>> >>>>> When I attach it to a native plan9 machine and run "usb/ether -D", I >>>>> get the following output: >>>>> >>>>> usb/ether: fsioproc pid 212 >>>>> <- Tversion tag 65535 msize 8216 version '9P2000' >>>>> -> Rversion tag 65535 msize 8192 version '9P2000' >>>>> <- Tauth tag 6 afid 299 uname glenda aname >>>>> -> Rerror tag 6 ename permission denied >>>>> <- Tattach tag 6 fid 299 afid -1 uname glenda aname >>>>> -> Rattach tag 6 qid (000000000000000 0 d) >>>>> usb/ether: startdevs: opening #0 /dev/usb/ep5.0 >>>>> usb/ether: devmain: no data from device >>>>> usb/ether: no unhandled devices found >>>>> >>>>> When I run "usb/usbd", I get: >>>>> ... >>>>> usb/usbd: /dev/usb/ep5.0: no port information >>>>> >>>>> I am pretty much out of ideas here. >>>>> >>>>> Any help? >>>>> >>>>> -- >>>>> >>>>> benthor >>>>> >>>>> >>>> >>>> >>> >>> >> >> >
usbdebug
Description: Binary data
