wow, this produces an incredible amount of text... typing it is not an option... let me see if I can figure something out
On 13 October 2010 15:57, Francisco J Ballesteros <n...@lsub.org> wrote: > kill usbd, yes, it's not supported. I mean, if you kill it and it fails, > the man page says that you are not supposed to do that. But do it anyway :) > > Then, usb/usbd -dd > and see what happens. > > BTW I assume that you are not using a usb kbd/mouse to execute such commands. > If you are, then we can set usbdebug in plan9.ini, IIRC, and go from there. > > > On Wed, Oct 13, 2010 at 3:42 PM, Thorben Krueger > <thkru...@googlemail.com> wrote: >> Ok, when I reboot (I don't know how to reset usdb) and run usb/usbd -dd I >> get: >> ... >> usb/usbd: /dev/usb/ep5.0 starting >> usb/usbd: opendev 0x60b90 /dev/usb/ep5.0 >> usb/usbd: /dev/usb/ep5.0: no port information >> usb/usbd: /dev/usb/ep5.0: ports 2 maxpkt 64 >> >> What now? >> >> On 13 October 2010 15:31, Francisco J Ballesteros <n...@lsub.org> wrote: >>> It seems usbd is not getting the descriptors it needs. >>> You may try running usbd -dd to see which requests >>> have problems. >>> We could try to see how to proceed then, depending >>> on what's going on. >>> >>> On Wed, Oct 13, 2010 at 3:21 PM, Thorben Krueger >>> <thkru...@googlemail.com> wrote: >>>> I configured my mobile phone to share all it's connectivity (gprs, >>>> wifi) via usb, i.e., act as a usb router (including a dhcp server). >>>> >>>> When I attach it to a linux machine, dmesg says: >>>> >>>> usb 2-2: new high speed USB device using ehci_hcd and address 14 >>>> cdc_acm 2-2:1.6: This device cannot do calls on its own. It is not a modem. >>>> cdc_acm 2-2:1.6: ttyACM0: USB ACM device >>>> cdc_ether 2-2:1.8: usb0: register 'cdc_ether' at usb-0000:00:1d.7-2, >>>> CDC Ethernet Device, da:fc:05:9a:bd:95 >>>> >>>> then I simply do "ifconfig usb0 up; dhcpcd usb0" and I have connectivity. >>>> >>>> When I attach it to a native plan9 machine and run "usb/ether -D", I >>>> get the following output: >>>> >>>> usb/ether: fsioproc pid 212 >>>> <- Tversion tag 65535 msize 8216 version '9P2000' >>>> -> Rversion tag 65535 msize 8192 version '9P2000' >>>> <- Tauth tag 6 afid 299 uname glenda aname >>>> -> Rerror tag 6 ename permission denied >>>> <- Tattach tag 6 fid 299 afid -1 uname glenda aname >>>> -> Rattach tag 6 qid (000000000000000 0 d) >>>> usb/ether: startdevs: opening #0 /dev/usb/ep5.0 >>>> usb/ether: devmain: no data from device >>>> usb/ether: no unhandled devices found >>>> >>>> When I run "usb/usbd", I get: >>>> ... >>>> usb/usbd: /dev/usb/ep5.0: no port information >>>> >>>> I am pretty much out of ideas here. >>>> >>>> Any help? >>>> >>>> -- >>>> >>>> benthor >>>> >>>> >>> >>> >> >> > >
