kill usbd, yes, it's not supported. I mean, if you kill it and it fails, the man page says that you are not supposed to do that. But do it anyway :)
Then, usb/usbd -dd and see what happens. BTW I assume that you are not using a usb kbd/mouse to execute such commands. If you are, then we can set usbdebug in plan9.ini, IIRC, and go from there. On Wed, Oct 13, 2010 at 3:42 PM, Thorben Krueger <thkru...@googlemail.com> wrote: > Ok, when I reboot (I don't know how to reset usdb) and run usb/usbd -dd I get: > ... > usb/usbd: /dev/usb/ep5.0 starting > usb/usbd: opendev 0x60b90 /dev/usb/ep5.0 > usb/usbd: /dev/usb/ep5.0: no port information > usb/usbd: /dev/usb/ep5.0: ports 2 maxpkt 64 > > What now? > > On 13 October 2010 15:31, Francisco J Ballesteros <n...@lsub.org> wrote: >> It seems usbd is not getting the descriptors it needs. >> You may try running usbd -dd to see which requests >> have problems. >> We could try to see how to proceed then, depending >> on what's going on. >> >> On Wed, Oct 13, 2010 at 3:21 PM, Thorben Krueger >> <thkru...@googlemail.com> wrote: >>> I configured my mobile phone to share all it's connectivity (gprs, >>> wifi) via usb, i.e., act as a usb router (including a dhcp server). >>> >>> When I attach it to a linux machine, dmesg says: >>> >>> usb 2-2: new high speed USB device using ehci_hcd and address 14 >>> cdc_acm 2-2:1.6: This device cannot do calls on its own. It is not a modem. >>> cdc_acm 2-2:1.6: ttyACM0: USB ACM device >>> cdc_ether 2-2:1.8: usb0: register 'cdc_ether' at usb-0000:00:1d.7-2, >>> CDC Ethernet Device, da:fc:05:9a:bd:95 >>> >>> then I simply do "ifconfig usb0 up; dhcpcd usb0" and I have connectivity. >>> >>> When I attach it to a native plan9 machine and run "usb/ether -D", I >>> get the following output: >>> >>> usb/ether: fsioproc pid 212 >>> <- Tversion tag 65535 msize 8216 version '9P2000' >>> -> Rversion tag 65535 msize 8192 version '9P2000' >>> <- Tauth tag 6 afid 299 uname glenda aname >>> -> Rerror tag 6 ename permission denied >>> <- Tattach tag 6 fid 299 afid -1 uname glenda aname >>> -> Rattach tag 6 qid (000000000000000 0 d) >>> usb/ether: startdevs: opening #0 /dev/usb/ep5.0 >>> usb/ether: devmain: no data from device >>> usb/ether: no unhandled devices found >>> >>> When I run "usb/usbd", I get: >>> ... >>> usb/usbd: /dev/usb/ep5.0: no port information >>> >>> I am pretty much out of ideas here. >>> >>> Any help? >>> >>> -- >>> >>> benthor >>> >>> >> >> > >
