Ok, when I reboot (I don't know how to reset usdb) and run usb/usbd -dd I get: ... usb/usbd: /dev/usb/ep5.0 starting usb/usbd: opendev 0x60b90 /dev/usb/ep5.0 usb/usbd: /dev/usb/ep5.0: no port information usb/usbd: /dev/usb/ep5.0: ports 2 maxpkt 64
What now? On 13 October 2010 15:31, Francisco J Ballesteros <n...@lsub.org> wrote: > It seems usbd is not getting the descriptors it needs. > You may try running usbd -dd to see which requests > have problems. > We could try to see how to proceed then, depending > on what's going on. > > On Wed, Oct 13, 2010 at 3:21 PM, Thorben Krueger > <thkru...@googlemail.com> wrote: >> I configured my mobile phone to share all it's connectivity (gprs, >> wifi) via usb, i.e., act as a usb router (including a dhcp server). >> >> When I attach it to a linux machine, dmesg says: >> >> usb 2-2: new high speed USB device using ehci_hcd and address 14 >> cdc_acm 2-2:1.6: This device cannot do calls on its own. It is not a modem. >> cdc_acm 2-2:1.6: ttyACM0: USB ACM device >> cdc_ether 2-2:1.8: usb0: register 'cdc_ether' at usb-0000:00:1d.7-2, >> CDC Ethernet Device, da:fc:05:9a:bd:95 >> >> then I simply do "ifconfig usb0 up; dhcpcd usb0" and I have connectivity. >> >> When I attach it to a native plan9 machine and run "usb/ether -D", I >> get the following output: >> >> usb/ether: fsioproc pid 212 >> <- Tversion tag 65535 msize 8216 version '9P2000' >> -> Rversion tag 65535 msize 8192 version '9P2000' >> <- Tauth tag 6 afid 299 uname glenda aname >> -> Rerror tag 6 ename permission denied >> <- Tattach tag 6 fid 299 afid -1 uname glenda aname >> -> Rattach tag 6 qid (000000000000000 0 d) >> usb/ether: startdevs: opening #0 /dev/usb/ep5.0 >> usb/ether: devmain: no data from device >> usb/ether: no unhandled devices found >> >> When I run "usb/usbd", I get: >> ... >> usb/usbd: /dev/usb/ep5.0: no port information >> >> I am pretty much out of ideas here. >> >> Any help? >> >> -- >> >> benthor >> >> > >
