hello Seems I fell again in the bios ahci set up trap. Checking the BIOS options seems it was in Enhaced Ide mode instead of Enhaced AHCI mode.
Now the iso works perfectly. For those of you looking for a "modern" PC to run plan9, this is what i have: * asus P6T SE * Core i7 (4 core works) * 4GB DDR3 RAM * ati hd5750 (works in vesa 1280x960x8) * hard disk WD caviar 300 GB * realtek GB network (works) 9atom from this weekend boots and install with no problems setting up AHCI mode first. slds. gabi El 11/04/2010, a las 14:37, Gabriel Diaz Lopez de la Llave escribió: > hello > > I have it booting now. I did a disk/format using the 9load from the cdboot > image, and the 9pcf kernel from the iso. > > Now i'm getting messages about caught missed ide interrupts. . .and this > slows down disk operations a lot, i guess first fossil dump to venti will > take ages. > > now i'm stuck at version...time line. . . .i'll try if enabling dma could > solve anything, but not sure when i will be able to access the console. . . > > can i enable dma from the plan9.ini? > > thanks. > > gabi > > > El 10/04/2010, a las 21:38, erik quanstrom escribió: > >>> This is the 9load panic (manually transcribed): >>> >>> PBS2. . . Plan 9 From Bell Labs >>> no vga; serial console only >>> cpu0: 2675MHz i7 loop 142773 >>> apm ax=f000 cx=f000 dx=40 di=100 ebx=ffff esi=0 >>> found 11 e820 entries >>> flags=10a07 trap=e ecode=2 pc=0x800377ff >>> ax 8002c391 bx 00000000 cx ffffffff dx 80047fac >>> si 00000001 di 8004ad88 bp 80061c20 >>> cs 0010 ds 008 es 0008 fd 0008 gs 0008 >>> cr0 800000011 cr2 8942443 cr3 0000c000 >>> panic: exception/interrupt 14 >>> press almost any key. . . >>> >>> I installed again to see if i missed some odd behaviour the first >>> time, but seems there are no noticeable error messages. Also the >>> install speed is fine, there is no huge load of interrupts when >>> installing and no missed interrupt messages. >>> >>> The interrupt 14 was associated with sdC and sdD. >> >> is this a freshly download cd? some changes were made >> apr 3 that should fix this problem. this line is the tipoff: >> >>> no vga; serial console only >> >> - erik >> > >
