hello I have it booting now. I did a disk/format using the 9load from the cdboot image, and the 9pcf kernel from the iso.
Now i'm getting messages about caught missed ide interrupts. . .and this slows down disk operations a lot, i guess first fossil dump to venti will take ages. now i'm stuck at version...time line. . . .i'll try if enabling dma could solve anything, but not sure when i will be able to access the console. . . can i enable dma from the plan9.ini? thanks. gabi El 10/04/2010, a las 21:38, erik quanstrom escribió: >> This is the 9load panic (manually transcribed): >> >> PBS2. . . Plan 9 From Bell Labs >> no vga; serial console only >> cpu0: 2675MHz i7 loop 142773 >> apm ax=f000 cx=f000 dx=40 di=100 ebx=ffff esi=0 >> found 11 e820 entries >> flags=10a07 trap=e ecode=2 pc=0x800377ff >> ax 8002c391 bx 00000000 cx ffffffff dx 80047fac >> si 00000001 di 8004ad88 bp 80061c20 >> cs 0010 ds 008 es 0008 fd 0008 gs 0008 >> cr0 800000011 cr2 8942443 cr3 0000c000 >> panic: exception/interrupt 14 >> press almost any key. . . >> >> I installed again to see if i missed some odd behaviour the first >> time, but seems there are no noticeable error messages. Also the >> install speed is fine, there is no huge load of interrupts when >> installing and no missed interrupt messages. >> >> The interrupt 14 was associated with sdC and sdD. > > is this a freshly download cd? some changes were made > apr 3 that should fix this problem. this line is the tipoff: > >> no vga; serial console only > > - erik >
