Thanks for replying but it gives me this error log
> *ERROR: rpi-hwup-image-1.0-r0 do_rootfs: Unable to install packages. > Command > '/yocto/poky/build/tmp/work/raspberrypi3-poky-linux-gnueabi/rpi-hwup-image/1.0-r0/recipe-sysroot-native/usr/bin/apt-get > install --force-yes --allow-unauthenticated run-postinsts > packagegroup-core-boot kernel-modules rpi-config' returned 100:* > *Reading package lists...* > *Building dependency tree...* > *Reading state information...* > *Package rpi-config is not available, but is referred to by another > package.* > *This may mean that the package is missing, has been obsoleted, or**is > only available from another source* > *E: Package 'rpi-config' has no installation candidate* > > *ERROR: rpi-hwup-image-1.0-r0 do_rootfs: Function failed: do_rootfs* > *ERROR: Logfile of failure stored in: > /yocto/poky/build/tmp/work/raspberrypi3-poky-linux-gnueabi/rpi-hwup-image/1.0-r0/temp/log.do_rootfs.2252**ERROR: > Task > (/yocto/poky/meta-raspberrypi/recipes-core/images/rpi-hwup-image.bb:do_rootfs) > failed with exit code '1'* All what i did is IMAGE_INSTALL_append = "rpi-config" , the recipe file is not exist in the meta-raspberry On 13 September 2017 at 09:27, Ayoub Zaki <ayoub.z...@embexus.com> wrote: > I ran into the same problem: > > ENABLE_UART = "1" is not enough you should also add INSTALL_append= " > rpi-config" to your local.conf and Serial port will be enabled. > > On 12.09.2017 14:09, yahia farghaly wrote: > > I have bitbaked rpi-hwup-image for raspberry pi 3 on sd card and connected > the serial ports to *usb to ttl device* . i have set the minicom to > port: /dev/ttyUSB0 > baud rate: 115200 > the image is booting fine and i can see the prompt on the screen but > cannot see in my serial console using minicom. > *is serial enabled by default for this image ? * > i also tried ENABLE_UART = "1" in local.conf but doesn't help. > > how to enable it ? and what the serial device name with respect to > raspberry pi > > thanks, > > -- > Yahia Farghaly > Graduated from Faculty of Engineering - Electronics and Communications > Department at Cairo University. > Linkedin <https://linkedin.com/in/yahiafarghaly> - GitHub > <https://github.com/yahiafarghaly> > > > > > > > > -- > > Ayoub Zaki > Embedded Systems Consultant > > Vaihinger Str. 2/1 > 71634 Ludwigsburg > > e-mail: ayoub.z...@embexus.com > Tel: +49176-62901545https://embexus.com > > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > > -- Yahia Farghaly Graduated from Faculty of Engineering - Electronics and Communications Department at Cairo University. Linkedin <https://linkedin.com/in/yahiafarghaly> - GitHub <https://github.com/yahiafarghaly>
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
