On Sun, Dec 18, 2016 at 8:25 AM, Paul Barker <p...@paulbarker.me.uk> wrote: > On Sun, 18 Dec 2016 15:46:19 +0100 > Mirza Krak <mirza.k...@gmail.com> wrote: > >> Hi. >> >> I have been looking in to the possibility to utilize yocto autobuilder >> for one of my own projects. >> >> But I am having some problems setting this up and hopefully someone >> here can provide some pointers. >> >> I did the "quickstart part": >> >> git clone git://git.yoctoproject.org/yocto-autobuilder >> cd yocto-autobuilder >> . ./yocto-autobuilder-setup >> yocto-start-autobuilder both >> >> Above succeeds without any issues. But now what? :) >> >> I went to https://localhost:8010. I tried to login using the >> information that is in the .htpasswd file but that did not work. Where >> are the credentials to login setup? > > You'll need to create the .htpasswd file yourself. I think the > "htpasswd" tool can do this for you, I can't remember the exact > commands I used to make mine though sorry. > >> >> I also made an attempt to remove all un-wanted buildsets and now >> buildset-config contains (all other directories are removed) >> >> nightly-mender-rpi.conf yoctoAB.conf >> >> Above is parsed correctly on start-up but build is never triggered. I >> probably removed to much :). Looking in to nigthly.conf it seem that >> is the one that trigger all other nightly builds? >> >> My fork can be found at [1]. >> >> [1]. https://github.com/mirzak/yocto-autobuilder-mender-rpi > > This looks good, you just need to setup the scheduler with something > like this in nightly-mender-rpi.conf: > > scheduler: > [{'nightly-build':{'type':'Nightly','hour':23,'minute':0}}] > > You should only need a separate nightly.conf when you want that to > trigger multiple builds. > > I've recently setup an autobuilder for meta-raspberrypi which I'll be > publishing once I've got the last bits of setup done. If you're still > struggling to get the nightly triggering working let me know and I'll > put up the configurations I've used as a git repository.
There is also additional helpful information on the Yocto Autobuilder wiki page here: https://wiki.yoctoproject.org/wiki/The_Yocto_Autobuilder. Some of the information applies to the Yocto Project build cluster, but is still applicable to local autobuilders. I followed the same instructions to setup a local AB. Be sure to use the htpasswd command that's in the autobuilder git tree (in one of the bin directories, as I recall), rather than a native system one. The AB version defaults to the shorter crypto scheme that buildbot requires. -Bill -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
