So Khem, that's what I've done:
*Load from git and backport:*
git clone -b kirkstone git://git.yoctoproject.org/poky ./src/poky
git clone -b kirkstone git://git.openembedded.org/meta-openembedded
./src/meta-openembedded
git clone -b kirkstone git://git.yoctoproject.org/meta-raspberrypi
./src/meta-raspberrypi
git checkout master
git checkout kiskstone
git cherry-pick master
Auto-merging docs/extra-build-config.md
Auto-merging recipes-bsp/bootfiles/rpi-cmdline.bb
[kirkstone a900a5e] rpi-cmdline, rpi-u-boot-src: Support USB boot
Author: Harunobu Kurokawa <harunobu.kurokawa...@renesas.com>
Date: Fri May 5 14:49:51 2023 +0900
Committer: quadfloor <quadfl...@yocto.quadfloor.com>
Your name and email address were configured automatically based
on your username and hostname. Please check that they are accurate.
You can suppress this message by setting them explicitly. Run the
following command and follow the instructions in your editor to edit
your configuration file:
git config --global --edit
After doing this, you may fix the identity used for this commit with:
git commit --amend --reset-author
4 files changed, 24 insertions(+), 3 deletions(-)
*Configuration:*
After that, rebuilt with the short configuration:
MACHINE = "raspberrypi0-wifi"
SERIAL_CONSOLE = ""
DISABLE_RPI_BOOT_LOGO = "1"
DISABLE_OVERSCAN = "1"
DISABLE_SPLASH = "1"
BOOT_DELAY = "0"
GPU_MEM_256 = "128"
GPU_MEM_512 = "196"
GPU_MEM_1024 = "396"
PACKAGE_CLASSES = "package_ipk"
DISTRO_FEATURES:append = " wifi "
IMAGE_INSTALL:append = " linux-firmware-bcm43430 wpa-supplicant"
IMAGE_FSTYPES = "tar.bz2 ext4 rpi-sdimg"
SDIMG_ROOTFS_TYPE = "ext4"
$ cat bblayers.conf
# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
POKY_BBLAYERS_CONF_VERSION = "2"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/quadfloor/release_1/src/poky/meta \
/home/quadfloor/release_1/src/poky/meta-poky \
/home/quadfloor/release_1/src/poky/meta-yocto-bsp \
/home/quadfloor/release_1/src/meta-openembedded/meta-oe \
/home/quadfloor/release_1/src/meta-openembedded/meta-python \
/home/quadfloor/release_1/src/meta-openembedded/meta-multimedia \
/home/quadfloor/release_1/src/meta-openembedded/meta-networking \
/home/quadfloor/release_1/src/meta-raspberrypi \
"
*Result:
* $ ifcofing -a -> Only lo interface, no wlan
$ dmesg | grep brcmfmac shows nothing....
$ dmesg | grep wlan shows nothing....
$ lsmod
Module Size Used by
nfsd 454656 11
So, basically the same....
Am I doing the backport correctly? Maybe config file problems?
Thanks for supporting...
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#61922): https://lists.yoctoproject.org/g/yocto/message/61922
Mute This Topic: https://lists.yoctoproject.org/mt/103150047/21656
Group Owner: yocto+ow...@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
