go into meta-raspberrypi checkout and then
then do
git cherry-pick 0917b60527242d3668efc2d3b918df64b13e7b6f
this should bring the one commit I am asking you to apply on top of kirkstone.
On Fri, Dec 15, 2023 at 3:35 PM Renato Mendes
<renato.mendes....@gmail.com> wrote:
>
>
> Sorry I’m confused… what exactly Khem asked to do - can you please elaborate.
> Thanks.
>
> Em 15 de dez. de 2023, à(s) 18:51, Martin Jansa <martin.ja...@gmail.com>
> escreveu:
>
>
> > Am I doing the backport correctly? Maybe config file problems?
>
> You've backported different commit than what Khem asked you to try.
>
> On Fri, Dec 15, 2023 at 10:33 PM Renato Mendes <renato.mendes....@gmail.com>
> wrote:
>>
>> So Khem, that's what I've done:
>>
>> Load from git and backport:
>>
>> git clone -b kirkstone git://git.yoctoproject.org/poky ./src/poky
>> git clone -b kirkstone git://git.openembedded.org/meta-openembedded
>> ./src/meta-openembedded
>>
>> git clone -b kirkstone git://git.yoctoproject.org/meta-raspberrypi
>> ./src/meta-raspberrypi
>> git checkout master
>> git checkout kiskstone
>> git cherry-pick master
>> Auto-merging docs/extra-build-config.md
>> Auto-merging recipes-bsp/bootfiles/rpi-cmdline.bb
>> [kirkstone a900a5e] rpi-cmdline, rpi-u-boot-src: Support USB boot
>> Author: Harunobu Kurokawa <harunobu.kurokawa...@renesas.com>
>> Date: Fri May 5 14:49:51 2023 +0900
>> Committer: quadfloor <quadfl...@yocto.quadfloor.com>
>> Your name and email address were configured automatically based
>> on your username and hostname. Please check that they are accurate.
>> You can suppress this message by setting them explicitly. Run the
>> following command and follow the instructions in your editor to edit
>> your configuration file:
>>
>> git config --global --edit
>>
>> After doing this, you may fix the identity used for this commit with:
>>
>> git commit --amend --reset-author
>>
>> 4 files changed, 24 insertions(+), 3 deletions(-)
>>
>> Configuration:
>>
>> After that, rebuilt with the short configuration:
>>
>> MACHINE = "raspberrypi0-wifi"
>> SERIAL_CONSOLE = ""
>> DISABLE_RPI_BOOT_LOGO = "1"
>> DISABLE_OVERSCAN = "1"
>> DISABLE_SPLASH = "1"
>> BOOT_DELAY = "0"
>> GPU_MEM_256 = "128"
>> GPU_MEM_512 = "196"
>> GPU_MEM_1024 = "396"
>> PACKAGE_CLASSES = "package_ipk"
>> DISTRO_FEATURES:append = " wifi "
>> IMAGE_INSTALL:append = " linux-firmware-bcm43430 wpa-supplicant"
>> IMAGE_FSTYPES = "tar.bz2 ext4 rpi-sdimg"
>> SDIMG_ROOTFS_TYPE = "ext4"
>>
>>
>> $ cat bblayers.conf
>> # POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
>> # changes incompatibly
>> POKY_BBLAYERS_CONF_VERSION = "2"
>>
>> BBPATH = "${TOPDIR}"
>> BBFILES ?= ""
>>
>> BBLAYERS ?= " \
>> /home/quadfloor/release_1/src/poky/meta \
>> /home/quadfloor/release_1/src/poky/meta-poky \
>> /home/quadfloor/release_1/src/poky/meta-yocto-bsp \
>> /home/quadfloor/release_1/src/meta-openembedded/meta-oe \
>> /home/quadfloor/release_1/src/meta-openembedded/meta-python \
>> /home/quadfloor/release_1/src/meta-openembedded/meta-multimedia \
>> /home/quadfloor/release_1/src/meta-openembedded/meta-networking \
>> /home/quadfloor/release_1/src/meta-raspberrypi \
>> "
>>
>> Result:
>> $ ifcofing -a -> Only lo interface, no wlan
>>
>> $ dmesg | grep brcmfmac shows nothing....
>> $ dmesg | grep wlan shows nothing....
>>
>> $ lsmod
>> Module Size Used by
>> nfsd 454656 11
>>
>> So, basically the same....
>>
>> Am I doing the backport correctly? Maybe config file problems?
>>
>> Thanks for supporting...
>>
>>
>>
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#61925): https://lists.yoctoproject.org/g/yocto/message/61925
Mute This Topic: https://lists.yoctoproject.org/mt/103150047/21656
Group Owner: yocto+ow...@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
