I'm still struggling to solve that... I came up with a very basic configuration
on Yocto (using kirkstone):
# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
POKY_BBLAYERS_CONF_VERSION = "2"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/quadfloor/release_1/src/poky/meta \
/home/quadfloor/release_1/src/poky/meta-poky \
/home/quadfloor/release_1/src/poky/meta-yocto-bsp \
/home/quadfloor/release_1/src/meta-openembedded/meta-oe \
/home/quadfloor/release_1/src/meta-openembedded/meta-python \
/home/quadfloor/release_1/src/meta-openembedded/meta-multimedia \
/home/quadfloor/release_1/src/meta-openembedded/meta-networking \
/home/quadfloor/release_1/src/meta-raspberrypi \
"
local.conf:
MACHINE = "raspberrypi0-wifi"
SERIAL_CONSOLE = ""
DISABLE_RPI_BOOT_LOGO = "1"
DISABLE_OVERSCAN = "1"
DISABLE_SPLASH = "1"
BOOT_DELAY = "0"
GPU_MEM_256 = "128"
GPU_MEM_512 = "196"
GPU_MEM_1024 = "396"
PACKAGE_CLASSES = "package_ipk"
DISTRO_FEATURES:append = " wifi "
IMAGE_INSTALL:append = " linux-firmware-bcm43430 wpa-supplicant"
IMAGE_FSTYPES = "tar.bz2 ext4 rpi-sdimg"
SDIMG_ROOTFS_TYPE = "ext4"
The error still persists: No wlan at all (ifconfig -a show only lo).
No idea where to go - project stuck and tigh deadline... Help very much
needed...
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#61906): https://lists.yoctoproject.org/g/yocto/message/61906
Mute This Topic: https://lists.yoctoproject.org/mt/103150047/21656
Group Owner: yocto+ow...@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
