Okay... I see that those were assigned for calls (sorry, I'm new remember). After doing further testing, it seems that the processing is only showing/hiding certain elements in the pdf after conversion. It doesn't actually make visual changes, such as font size/type, etc... Is this normal? If so, does your consulting services cover creating custom conversion scenarios to accommodate colors, and other visual changes? Thanks again.
Regards, Wes Warner Director Flight Technical o. 949-892-4332 m. 714-863-5065 Have Fun! jetsuite.com/values Offering WiFi-equipped Phenom 100s & CJ3s. To Fly: 866 779 7770 LEGAL DISCLAIMER The information transmitted is intended solely for the individual or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you have received this email in error please contact the sender and delete the material from any computer. On Wed, Nov 2, 2016 at 1:30 PM, Wes Warner <wes.war...@jetsuite.com> wrote: > Hello, > I did some further investigation. Firstly, I restarted the > application. Once I did that, it appears that your profiles are working. > However, when I check the attributes, they are listed differently than > mine. It appears that I have a "revision" attribute that I can then assign > a "Value" to, where yours appears to be a class. Have I installed > something incorrectly? Thanks. > > > Regards, > Wes Warner > Director Flight Technical > o. 949-892-4332 m. 714-863-5065 > Have Fun! jetsuite.com/values > > Offering WiFi-equipped Phenom 100s & CJ3s. > To Fly: 866 779 7770 > > LEGAL DISCLAIMER > The information transmitted is intended solely for the individual or > entity to whom it is addressed and may contain confidential and/or > privileged material. Any review, retransmission, dissemination or other use > of or taking action in reliance upon this information by persons or > entities other than the intended recipient is prohibited. If you have > received this email in error please contact the sender and delete the > material from any computer. > > > > On Wed, Nov 2, 2016 at 11:09 AM, Wes Warner <wes.war...@jetsuite.com> > wrote: > >> Hello, >> Thanks for the sample files. I followed your example using your files >> and got different results. Mine showed no change whether rev or norev is >> selected. I also reset the document conversion parameters with no luck. >> Any other suggestions? >> >> Pardon my ignorance (I'm now more heavily involved with authoring tools), >> but I will need color output based on attributes. Does this mean that I >> will need to assign processing instructions? Our documents are currently >> processed using Oxygenxml as DocBook and converted to pdf with processing >> instructions. >> >> Thanks for your help. >> >> >> Regards, >> Wes Warner >> Director Flight Technical >> o. 949-892-4332 m. 714-863-5065 >> Have Fun! jetsuite.com/values >> >> Offering WiFi-equipped Phenom 100s & CJ3s. >> To Fly: 866 779 7770 >> >> LEGAL DISCLAIMER >> The information transmitted is intended solely for the individual or >> entity to whom it is addressed and may contain confidential and/or >> privileged material. Any review, retransmission, dissemination or other use >> of or taking action in reliance upon this information by persons or >> entities other than the intended recipient is prohibited. If you have >> received this email in error please contact the sender and delete the >> material from any computer. >> >> >> >> On Wed, Nov 2, 2016 at 10:41 AM, Hussein Shafie <huss...@xmlmind.com> >> wrote: >> >>> On 11/02/2016 05:38 PM, Wes Warner wrote: >>> >>>> Okay... I'm really stuck. I've attached some shots of my settings. I've >>>> tried sitting the "Style of Selected Profile" and "Style of Unselected >>>> Profile" as well. I managed to hide the text on an unselected profile >>>> once, but that's it. I can't seem to get color, font style, etc... to >>>> output. I've got to be missing something. Thanks. >>>> >>>> >>> I saw nothing wrong in the screenshots you sent us. >>> >>> I think I managed to reproduce what you did and found no problem >>> whatsoever. >>> >>> See attached Test.xml and Test.profiles. >>> >>> If I select profile "rev" and I convert Test.xml to PDF, I get >>> Test_rev.pdf. All elements having revision="No Revision" have been >>> correctly excluded from this PDF. >>> >>> If I select profile "norev" and I convert Test.xml to PDF, I get >>> Test_norev.pdf. All elements having revision="Revision" have been correctly >>> excluded from this PDF. >>> >>> Test.profiles is also used to give specific colors to elements having >>> attribute revision equal to "Revision" and/or "No Revision". This has an >>> effect on screen (See attached screenshot) but cannot have any effect in >>> the PDF. I mean, it's just a visualization facility. >>> >>> Now let's suppose you give specific colors to selected profile and/or to >>> unselected profile (didn't do that in my test), it will also work on screen >>> but, in the case of a *DocBook* document, this cannot have any effect in >>> the PDF. >>> >>> If Test.xml were a *DITA* document and not a DocBook document, giving >>> specific colors selected profile and/or to unselected profile would have >>> worked both on screen and in the PDF because, unlike DocBook, DITA supports >>> *flagging*. DocBook only supports *excluding*. >>> >>> Sorry if this is not clear in the documentation. >>> >>> >>> >>> >>> >>> >> >
-- XMLmind XML Editor Support List xmleditor-support@xmlmind.com http://www.xmlmind.com/mailman/listinfo/xmleditor-support
