configurations across arm64 and arm32.
prepare_xen_region, fail_insufficient_regions() will be used by both arm32 and
arm64. Thus, they have been moved to common.inc.
*_PRBAR are moved to arm64/sysregs.h.
*_PRLAR are moved to common.inc as they are common between arm32 and arm64.
Introduce WRITE_SYSREG_ASM to write to the system registers from the common asm
file.
Signed-off-by: Ayan Kumar Halder <ayan.kumar.hal...@amd.com>
---
Changes from
v1 -
1. enable_mpu() now sets HMAIR{0,1} registers. This is similar to what is
being done in enable_mmu(). All the mm related configurations happen in this
function.
2. Fixed some typos.
v2 -
1. Extracted the arm64 head.S functions/macros in a common file.
v3 -
1. Moved *_PRLAR are moved to prepare_xen_region.inc
2. enable_boot_cpu_mm() is preserved in mpu/head.S.
3. STORE_SYSREG is renamed as WRITE_SYSREG_ASM()
4. LOAD_SYSREG is removed.
5. No need to save/restore lr in enable_boot_cpu_mm(). IOW, keep it as it was
in the original code.
v4 -
1. Rename prepare_xen_region.inc to common.inc
2. enable_secondary_cpu_mm() is moved back to mpu/head.S.
xen/arch/arm/arm64/mpu/head.S | 78 +----------------------
xen/arch/arm/include/asm/arm64/sysregs.h | 11 ++++
xen/arch/arm/include/asm/mpu/common.inc | 79 ++++++++++++++++++++++++
3 files changed, 91 insertions(+), 77 deletions(-)
create mode 100644 xen/arch/arm/include/asm/mpu/common.inc
diff --git a/xen/arch/arm/arm64/mpu/head.S b/xen/arch/arm/arm64/mpu/head.S
index ed01993d85..4d76a3166e 100644
--- a/xen/arch/arm/arm64/mpu/head.S
+++ b/xen/arch/arm/arm64/mpu/head.S
@@ -3,83 +3,7 @@
* Start-of-day code for an Armv8-R MPU system.
*/
-#include <asm/early_printk.h>
-#include <asm/mpu.h>
-
-/* Backgroud region enable/disable */
-#define SCTLR_ELx_BR BIT(17, UL)
-
-#define REGION_TEXT_PRBAR 0x38 /* SH=11 AP=10 XN=00 */
-#define REGION_RO_PRBAR 0x3A /* SH=11 AP=10 XN=10 */
-#define REGION_DATA_PRBAR 0x32 /* SH=11 AP=00 XN=10 */
-#define REGION_DEVICE_PRBAR 0x22 /* SH=10 AP=00 XN=10 */
-
-#define REGION_NORMAL_PRLAR 0x0f /* NS=0 ATTR=111 EN=1 */
-#define REGION_DEVICE_PRLAR 0x09 /* NS=0 ATTR=100 EN=1 */
-
-/*
- * Macro to prepare and set a EL2 MPU memory region.
- * We will also create an according MPU memory region entry, which
- * is a structure of pr_t, in table \prmap.
- *
- * sel: region selector
- * base: reg storing base address
- * limit: reg storing limit address
- * prbar: store computed PRBAR_EL2 value
- * prlar: store computed PRLAR_EL2 value
- * maxcount: maximum number of EL2 regions supported
- * attr_prbar: PRBAR_EL2-related memory attributes. If not specified it will
be
- * REGION_DATA_PRBAR
- * attr_prlar: PRLAR_EL2-related memory attributes. If not specified it will
be
- * REGION_NORMAL_PRLAR
- *
- * Preserves \maxcount
- * Output:
- * \sel: Next available region selector index.
- * Clobbers \base, \limit, \prbar, \prlar
- *
- * Note that all parameters using registers should be distinct.
- */
-.macro prepare_xen_region, sel, base, limit, prbar, prlar, maxcount,
attr_prbar=REGION_DATA_PRBAR, attr_prlar=REGION_NORMAL_PRLAR
- /* Check if the region is empty */
- cmp \base, \limit
- beq 1f
-
- /* Check if the number of regions exceeded the count specified in
MPUIR_EL2 */
- cmp \sel, \maxcount
- bge fail_insufficient_regions
-
- /* Prepare value for PRBAR_EL2 reg and preserve it in \prbar.*/
- and \base, \base, #MPU_REGION_MASK
- mov \prbar, #\attr_prbar
- orr \prbar, \prbar, \base
-
- /* Limit address should be inclusive */
- sub \limit, \limit, #1
- and \limit, \limit, #MPU_REGION_MASK
- mov \prlar, #\attr_prlar
- orr \prlar, \prlar, \limit
-
- msr PRSELR_EL2, \sel
- isb
- msr PRBAR_EL2, \prbar
- msr PRLAR_EL2, \prlar
- dsb sy
- isb
-
- add \sel, \sel, #1
-
-1:
-.endm
-
-/*
- * Failure caused due to insufficient MPU regions.
- */
-FUNC_LOCAL(fail_insufficient_regions)
- PRINT("- Selected MPU region is above the implemented number in MPUIR_EL2
-\r\n")
-1: wfe
- b 1b
-END(fail_insufficient_regions)
+#include <asm/mpu/common.inc>
/*
* Enable EL2 MPU and data cache
diff --git a/xen/arch/arm/include/asm/arm64/sysregs.h
b/xen/arch/arm/include/asm/arm64/sysregs.h
index b593e4028b..3ee3715430 100644
--- a/xen/arch/arm/include/asm/arm64/sysregs.h
+++ b/xen/arch/arm/include/asm/arm64/sysregs.h
@@ -462,6 +462,15 @@
#define ZCR_ELx_LEN_SIZE 9
#define ZCR_ELx_LEN_MASK 0x1ff
+#define REGION_TEXT_PRBAR 0x38 /* SH=11 AP=10 XN=00 */
+#define REGION_RO_PRBAR 0x3A /* SH=11 AP=10 XN=10 */
+#define REGION_DATA_PRBAR 0x32 /* SH=11 AP=00 XN=10 */
+#define REGION_DEVICE_PRBAR 0x22 /* SH=10 AP=00 XN=10 */
+
+#define WRITE_SYSREG_ASM(v, name) "msr " __stringify(name,) #v;
