Added a new file common.inc to hold the common earlyboot MPU regions
configurations across arm64 and arm32.

prepare_xen_region, fail_insufficient_regions() will be used by both arm32 and
arm64. Thus, they have been moved to common.inc.

*_PRBAR are moved to arm64/sysregs.h.
*_PRLAR are moved to common.inc as they are common between arm32 and arm64.

Introduce WRITE_SYSREG_ASM to write to the system registers from the common asm
file.

Signed-off-by: Ayan Kumar Halder <ayan.kumar.hal...@amd.com>
---

Changes from

v1 -

1. enable_mpu() now sets HMAIR{0,1} registers. This is similar to what is
being done in enable_mmu(). All the mm related configurations happen in this
function.

2. Fixed some typos.

v2 -
1. Extracted the arm64 head.S functions/macros in a common file.

v3 -
1. Moved *_PRLAR are moved to prepare_xen_region.inc

2. enable_boot_cpu_mm() is preserved in mpu/head.S.

3. STORE_SYSREG is renamed as WRITE_SYSREG_ASM()

4. LOAD_SYSREG is removed.

5. No need to save/restore lr in enable_boot_cpu_mm(). IOW, keep it as it was
in the original code.

v4 - 
1. Rename prepare_xen_region.inc to common.inc

2. enable_secondary_cpu_mm() is moved back to mpu/head.S. 

 xen/arch/arm/arm64/mpu/head.S            | 78 +----------------------
 xen/arch/arm/include/asm/arm64/sysregs.h | 11 ++++
 xen/arch/arm/include/asm/mpu/common.inc  | 79 ++++++++++++++++++++++++
 3 files changed, 91 insertions(+), 77 deletions(-)
 create mode 100644 xen/arch/arm/include/asm/mpu/common.inc

diff --git a/xen/arch/arm/arm64/mpu/head.S b/xen/arch/arm/arm64/mpu/head.S
index ed01993d85..4d76a3166e 100644
--- a/xen/arch/arm/arm64/mpu/head.S
+++ b/xen/arch/arm/arm64/mpu/head.S
@@ -3,83 +3,7 @@
  * Start-of-day code for an Armv8-R MPU system.
  */
 
-#include <asm/early_printk.h>
-#include <asm/mpu.h>
-
-/* Backgroud region enable/disable */
-#define SCTLR_ELx_BR    BIT(17, UL)
-
-#define REGION_TEXT_PRBAR       0x38    /* SH=11 AP=10 XN=00 */
-#define REGION_RO_PRBAR         0x3A    /* SH=11 AP=10 XN=10 */
-#define REGION_DATA_PRBAR       0x32    /* SH=11 AP=00 XN=10 */
-#define REGION_DEVICE_PRBAR     0x22    /* SH=10 AP=00 XN=10 */
-
-#define REGION_NORMAL_PRLAR     0x0f    /* NS=0 ATTR=111 EN=1 */
-#define REGION_DEVICE_PRLAR     0x09    /* NS=0 ATTR=100 EN=1 */
-
-/*
- * Macro to prepare and set a EL2 MPU memory region.
- * We will also create an according MPU memory region entry, which
- * is a structure of pr_t,  in table \prmap.
- *
- * sel:         region selector
- * base:        reg storing base address
- * limit:       reg storing limit address
- * prbar:       store computed PRBAR_EL2 value
- * prlar:       store computed PRLAR_EL2 value
- * maxcount:    maximum number of EL2 regions supported
- * attr_prbar:  PRBAR_EL2-related memory attributes. If not specified it will 
be
- *              REGION_DATA_PRBAR
- * attr_prlar:  PRLAR_EL2-related memory attributes. If not specified it will 
be
- *              REGION_NORMAL_PRLAR
- *
- * Preserves \maxcount
- * Output:
- *  \sel: Next available region selector index.
- * Clobbers \base, \limit, \prbar, \prlar
- *
- * Note that all parameters using registers should be distinct.
- */
-.macro prepare_xen_region, sel, base, limit, prbar, prlar, maxcount, 
attr_prbar=REGION_DATA_PRBAR, attr_prlar=REGION_NORMAL_PRLAR
-    /* Check if the region is empty */
-    cmp   \base, \limit
-    beq   1f
-
-    /* Check if the number of regions exceeded the count specified in 
MPUIR_EL2 */
-    cmp   \sel, \maxcount
-    bge   fail_insufficient_regions
-
-    /* Prepare value for PRBAR_EL2 reg and preserve it in \prbar.*/
-    and   \base, \base, #MPU_REGION_MASK
-    mov   \prbar, #\attr_prbar
-    orr   \prbar, \prbar, \base
-
-    /* Limit address should be inclusive */
-    sub   \limit, \limit, #1
-    and   \limit, \limit, #MPU_REGION_MASK
-    mov   \prlar, #\attr_prlar
-    orr   \prlar, \prlar, \limit
-
-    msr   PRSELR_EL2, \sel
-    isb
-    msr   PRBAR_EL2, \prbar
-    msr   PRLAR_EL2, \prlar
-    dsb   sy
-    isb
-
-    add   \sel, \sel, #1
-
-1:
-.endm
-
-/*
- * Failure caused due to insufficient MPU regions.
- */
-FUNC_LOCAL(fail_insufficient_regions)
-    PRINT("- Selected MPU region is above the implemented number in MPUIR_EL2 
-\r\n")
-1:  wfe
-    b   1b
-END(fail_insufficient_regions)
+#include <asm/mpu/common.inc>
 
 /*
  * Enable EL2 MPU and data cache
diff --git a/xen/arch/arm/include/asm/arm64/sysregs.h 
b/xen/arch/arm/include/asm/arm64/sysregs.h
index b593e4028b..3ee3715430 100644
--- a/xen/arch/arm/include/asm/arm64/sysregs.h
+++ b/xen/arch/arm/include/asm/arm64/sysregs.h
@@ -462,6 +462,15 @@
 #define ZCR_ELx_LEN_SIZE             9
 #define ZCR_ELx_LEN_MASK             0x1ff
 
+#define REGION_TEXT_PRBAR       0x38    /* SH=11 AP=10 XN=00 */
+#define REGION_RO_PRBAR         0x3A    /* SH=11 AP=10 XN=10 */
+#define REGION_DATA_PRBAR       0x32    /* SH=11 AP=00 XN=10 */
+#define REGION_DEVICE_PRBAR     0x22    /* SH=10 AP=00 XN=10 */
+
+#define WRITE_SYSREG_ASM(v, name) "msr " __stringify(name,) #v;
+
+#ifndef __ASSEMBLY__
+
 /* Access to system registers */
 
 #define WRITE_SYSREG64(v, name) do {                    \
@@ -481,6 +490,8 @@
 #define WRITE_SYSREG_LR(v, index)  WRITE_SYSREG(v, ICH_LR_REG(index))
 #define READ_SYSREG_LR(index)      READ_SYSREG(ICH_LR_REG(index))
 
+#endif /* __ASSEMBLY__ */
+
 #endif /* _ASM_ARM_ARM64_SYSREGS_H */
 
 /*
diff --git a/xen/arch/arm/include/asm/mpu/common.inc 
b/xen/arch/arm/include/asm/mpu/common.inc
new file mode 100644
index 0000000000..47868a1526
--- /dev/null
+++ b/xen/arch/arm/include/asm/mpu/common.inc
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <asm/mpu.h>
+#include <asm/sysregs.h>
+
+/* Backgroud region enable/disable */
+#define SCTLR_ELx_BR    BIT(17, UL)
+
+#define REGION_NORMAL_PRLAR     0x0f    /* NS=0 ATTR=111 EN=1 */
+#define REGION_DEVICE_PRLAR     0x09    /* NS=0 ATTR=100 EN=1 */
+
+/*
+ * Macro to prepare and set a EL2 MPU memory region.
+ * We will also create an according MPU memory region entry, which
+ * is a structure of pr_t,  in table \prmap.
+ *
+ * sel:         region selector
+ * base:        reg storing base address
+ * limit:       reg storing limit address
+ * prbar:       store computed PRBAR_EL2 value
+ * prlar:       store computed PRLAR_EL2 value
+ * maxcount:    maximum number of EL2 regions supported
+ * attr_prbar:  PRBAR_EL2-related memory attributes. If not specified it will 
be
+ *              REGION_DATA_PRBAR
+ * attr_prlar:  PRLAR_EL2-related memory attributes. If not specified it will 
be
+ *              REGION_NORMAL_PRLAR
+ *
+ * Preserves maxcount
+ * Output:
+ *  sel: Next available region selector index.
+ * Clobbers base, limit, prbar, prlar
+ *
+ * Note that all parameters using registers should be distinct.
+ */
+.macro prepare_xen_region, sel, base, limit, prbar, prlar, maxcount, 
attr_prbar=REGION_DATA_PRBAR, attr_prlar=REGION_NORMAL_PRLAR
+    /* Check if the region is empty */
+    cmp   \base, \limit
+    beq   1f
+
+    /* Check if the number of regions exceeded the count specified in 
MPUIR_EL2 */
+    cmp   \sel, \maxcount
+    bge   fail_insufficient_regions
+
+    /* Prepare value for PRBAR_EL2 reg and preserve it in \prbar.*/
+    and   \base, \base, #MPU_REGION_MASK
+    mov   \prbar, #\attr_prbar
+    orr   \prbar, \prbar, \base
+
+    /* Limit address should be inclusive */
+    sub   \limit, \limit, #1
+    and   \limit, \limit, #MPU_REGION_MASK
+    mov   \prlar, #\attr_prlar
+    orr   \prlar, \prlar, \limit
+
+    WRITE_SYSREG_ASM(\sel, PRSELR_EL2)
+    isb
+    WRITE_SYSREG_ASM(\prbar, PRBAR_EL2)
+    WRITE_SYSREG_ASM(\prlar, PRLAR_EL2)
+    dsb   sy
+    isb
+
+    add   \sel, \sel, #1
+
+1:
+.endm
+
+/* Failure caused due to insufficient MPU regions. */
+FUNC_LOCAL(fail_insufficient_regions)
+    PRINT("- Selected MPU region is above the implemented number in MPUIR_EL2 
-\r\n")
+1:  wfe
+    b   1b
+END(fail_insufficient_regions)
+
+/*
+ * Local variables:
+ * mode: ASM
+ * indent-tabs-mode: nil
+ * End:
+ */
-- 
2.25.1


Reply via email to